Self -support 4 Legged Angular Tower

Communication Towers are usually built on the ground,Website:http://www.transmission-towers.com,/green field , rooftop, strong bearing capacity of the wind. Angle Steel are main material used in towerstructures, including some steel plates and tubes. The structures can be also composed by steel tube only. Each section of the tower frame shall be connected by fasten bolts and nuts.  All tower structures shall be hot dipped galvanized after fabrication. Angle Steel Tower shall be composed by tower boots, tower body, lightning rod, platform, climbing ladder, antennas brackets, feeder panel and lightning deflectors. We supply and manufacture all tower related accessories and tower safety equipment. Our range of approved accessories include: ● GSM and MW Antenna Brackets ●Lattice and Monopole Tower Platforms ●Tower Safety Equipment ●Tower Paint Supply ●Navigation Lights and Cabling ●Tower Earthing Kits ●Cable Gantries and Support Ladders ●Tower Fastners Terms Detail Height 5-100Meter Wind Pressure 0-300 KM/H Details & Shape Mono pole, single pole ,triangular pole,square 4 legged, tubular or lattice type or combined Material Q345B/A572, minimum yield strength >=345MPA; Q235B/A36, minimum yield strength>=235MPA Surface treatment Hot dip galvanized as  ASTM A- 123, color polyester power ,painting or any other standard by client required. Design We can design free of charge if Qty is numerous, client should supply the design parameters. Standards ISO 9001 Welding Submerged  arc  welding , internal and external double welding makes the welding seam beautiful in shape      Welding Standard :AWS ( American Welding Society ) D 1.1 Working & Resting Platform Quantity 1-3 PCS Antenna Support 3-18 PCS Microwave Dish 3-18 PCS Spare parts All Necessary parts, e.g. Antenna Mount pole and Brackets , Climbing Steps, Safety Guide Cable tray,ladder, Lightning Rod, Mounting bracket for Obstruction light,  Holding down bolts/nuts, and all other bolt and nuts required for erection and installation