14-24KL LAF Flexitank for Chemicals transportation in 20 foot container

Ply PE+out PP bag

4x0.125mm ply= totally 4 layers PE

Loading/Discharging

Top loading/discharging / Bottom   loading/discharging

Valve

1. Traditional 3" butterfly valve with   anti-suction devise

2. Revolutionary   3" ball valve

a) Compared with butterfly valve, ball   valve is sealed more tightly and with better resistance to pressure. There is   no block when valve is opened, which make liquid flow through freely and   quickly.

b) In the joint position between internal   valve and flexitank, a safety protection device is added. This device could   effectively prevent inner film blocking the valve, and make residual liquid   the minimum after discharging.

3.valve with 2" or 2.5" quick   connector for choice

Flange

Hard PP instead of steel to reduce the pressure against   the flexitank surface thus reduce the risk of failures.

Safety Pin

Added on 3" valve to help to source thefting activities   if happened during transportation.

Automatic Air vent

The special design of air vent could automatically   release air pressure when it is more than 0.0065Mpa inside of the flexitank.   It would keep the cargo and flexitank safe during loading and transportation.

Upgrading on protective out PP woven bag

Our engineers tracked and tested 1000   pieces of flexitanks at different transportation modes and conditions. We   made those of the following revolutionary upgrading:

a)Protective out layer of BLT flexitank is   8m seamless tubular construction which would eliminate longitudinal seams.

b)Protective out layer of BLT flexitanks   are made of high-tech aramid fibers, and it has incomparable advantage at   tension and softness performance against ordinary PP fibers. 

c)Each 250px between woven of the protective   layer, there is a high strength zonal reinforcing rib. Their application will   make an innovative upgrade in the flexitank safety area.

Packing Capacity in Containers(20"   & 40")

The features of our flexitank (Food   Grade)

1)Quality Management System: ISO9001:2000,   ISO22000 supervision

2)Food   grade approval

3) Flexitank films fully comply with US FDA ,   European EC, and AAR regulation.

  Category

 Apply different flexitank materials   to different liquid.

Flexitank—Food Grade

All the materials must comply with   standards of food hygiene. 

Flexitank—Chemical Grade

Corrosion resisting materials and valve are   took.

 Flexitank—For   Oil

Proper for oils transportation

Heat-Resisting Flexitank

Apply heat-resisting materials,proper   for the storage and transportation of high temperature liquid products.

  Application

In FLEXITANK it is possible to transport   almost any of non-hazardous liquids,both industrial,and food application:

Foodstuff and Beverage:

Edible and animal oils and fats(liquid ands   olid), juices concentrates,syrups,water,wine,honey,food additives,fish   sauce,soy sauce,vinegar.

Industrial and Chemical:

Technical and industrial oils,chemical   additives,water-reducer,liquid cleaning means,emulsions,glycerin,some kinds   of paints,ink,liquid fertilizers,latex,transformer oils,other petrochemical   products etc