Auto parts production line X-ray real-time imaging detection system

Auto parts production line X-ray real-time imaging detection system

X-ray Digital imaging system (DR - Digital Radiograph) by imaging, X-ray machine, the X-ray machine synchronous control unit, with the highest detection sensitivity of the high-tech equipment. All digital radiographic testing standard, including welding, casting, corrosion testing standards, including metal, nonmetal and composite materials testing a variety of purposes, such as widely used in aviation, spaceflight, automobile, electric power, petroleum, chemical industry, pharmacy, special inspection, etc. High reliability, long life, low failure rate, high resolution, high resolution detector humanized design software, the interface is simple, easy to operate, according to the test requirements, develop software functions.

Scope of application and main technical parameters
1,Main use: detection of aluminum castings, aluminum and magnesium alloy castings, aluminum alloy castings, auto parts, epoxy resin and steel internal defects, such as blow hole, shrinkage cavity, porosity, etc.
2,X-ray flaw detection machine capacity: 225 kv, 3mA
3,X-ray flaw detection machine frequency: 40 KHZ
4,The maximum penetration (A3 steel) : 45 mm (shooting), 33 mm (real-time imaging state)
5,Refrigeration, cooling method: using the forced cooling, no liquid flow protection, temperature protection and self protection tube temperature 40 ℃ or less and ensure the ability of continuous work..
6,9 "industrial television systems or tablet digital detector
7,System sensitivity: dynamic sensitivity than 2.8%, the static sensitivity is better than that of 1.5% ~ 2.0%.
The imaging is better than that of 1.2 ~ 1.5%
8,The system resolution: 16 ~ 40 lp/cm