ANSI A420 WPL6 hot pressed seamless eccentric carbon steel pipe reducer
| Place of Origin: | Zhejiang |
|---|
Company Profile
| Location: | Cangzhou, Hebei, China (Mainland) |
|---|---|
| Business Type: | Manufacturer |
| Main Products: | Steel Tube Elbows, Tee Pipe Fitting, Steel Pipe Flange |
Product Detail
| Model No.: | 4'' * 2'' |
|---|
Product Description
ANSI A420 WPL6 hot pressed seamless eccentric carbon steel pipe reducer
Size:
|
Seamless |
DN15-DN600(1/2"-24") |
|
Welded |
DN200-DN2500(8"-100") |
|
forged |
DN8-DN100(1/4"-4") |
Material:
1. Carbon steel : ASTM A105, ASTM A350 LF2, ASTM A694 F42-F52-F60-F65- F70, C22.8, C21, Rst37.2, S235JRG2, P355NH, SS400
2. Stainless steel flange: ASTM A 182 F304-304L-304H, ASTM A182 F321-321H, ASTM A182 F347-347H, ASTM A182 F316-316L-316H
3. Alloy steel : ASTM A182 F1--F5- F9-F11, F12, F22, F51, 16Mo3, 1Cr5Mo, 15CrMo, 42CrMo, 12Cr1MoV, TStE355,4130, 4140, 4317, 4142, 4340, UNS440, 34CrNi3Mo, 25Cr2Ni4MoV, 18CrNiMo530CrMo, 9Cr2W, 9Cr2Mo, 9Cr3Mo, 60CrMoV, CK45, 5CrMnMo, 40Cr, 20Cr2Ni4, 5CrNiMo, 15CrNiMo, 20CrNiMo, 35CrMo, 40CrNiMo
4. Duplex Stainless Steel: ASTM A182 F44, F45, F51, F53, F55, F60, F61
5. Nickel Alloy: UNS 2200 (NICKEL 200), UNS 4400 (MONEL 400), UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600), UNS 6601 (INCONEL 601), UNS 6625 (INCONEL 625), UNS 10276 (HASTELLOY C 276), UNS 2201 (NICKEL 201), (ALLOY 20 / 20 CB 3)
6. Claded materials: ASTM B898, B263, B264 or closer explosion cladding, making materials of 2 in 1 or 3 in 1.
Standard:
ASME, MSS, EN, DIN, ISO, JIS, GB, SH, HG, JB, GD
Type:
Butt-welding pipe Fitting (Elbow, Tee, Reducer, Cross, Cap , Stub Ends)
Forged Pipe Fitting (Elbow, Tee, Cross ,Union, Coupling, Outlet, Boss, Bushing, Plug, Nipple)
Finish:
Transparent oil, rust-proof oil, hot galvanizing
Connection:
Butt Weld & Socket Weld & Thread
Application:
Low and middle pressure fluid pipeline, boiler, petroleum and natural gas industry, drilling, chemical industry, Refinery Company, fertilizer industry, power station, shipbuilding, onshore platform.
Impact Test:
1. All material furnished under this specification shall be tested for impact resistance at the temperature for the respective grade in A420 Table 6. Exceptions to these requirements are permissible when agreed upon between the purchaser and producer and specified in the order, in that the impact test is acceptable when made at tempera-tures different from those shown in Table 6, provided the test temperature is at least as low as the intended service temperature, and fittings are suitably marked in accordance with Section 18 to identify the reported test temperature.
2. The notched-bar impact test shall be made in accordance with the procedure for the simple-beam, Charpy-type test of Test Methods and Definitions A 370. Each impact test shall consist of breaking three specimens
| NPS | OD | surface to surface | NPS | OD | surface to surface | ||
| larger end | smaller end | larger end | smaller end | ||||
| 3/4"*1/2" | 1.05 | 0.84 | 1.50 | 20"*18" | 20.00 | 18.00 | 20.00 |
| 3/4"*3/8" | 1.05 | 0.68 | 1.50 | 20"*16" | 20.00 | 16.00 | 20.00 |
| 1"*3/4" | 1.32 | 1.05 | 2.00 | 20"*14" | 20.00 | 14.00 | 20.00 |
| 1"*1/2" | 1.32 | 0.84 | 2.00 | 20"*12" | 20.00 | 12.00 | 20.00 |
| 1 1/4"*1" | 1.66 | 1.32 | 2.00 | 22"*20" | 22.00 | 20.00 | 20.00 |
| 1 1/4"*3/4" | 1.66 | 1.05 | 2.00 | 22"*18" | 22.00 | 18.00 | 20.00 |
| 1 1/4"*1/2" | 1.66 | 0.84 | 2.00 | 22"*16" | 22.00 | 16.00 | 20.00 |
| 1 1/2"*1 1/4" | 1.90 | 1.66 | 2.50 | 22"*14" | 22.00 | 14.00 | 20.00 |
| 1 1/2"*1" | 1.90 | 1.32 | 2.50 | 24"*22" | 24.00 | 22.00 | 20.00 |
| 1 1/2"*3/4" | 1.90 | 1.05 | 2.50 | 24"*20" | 24.00 | 20.00 | 20.00 |
| 1 1/2"*1/2" | 1.90 | 0.84 | 2.50 |
| |||