High expansion gtade of EPS
| Min. Order: | 1 Metric Ton |
|---|---|
| Trade Term: | FOB |
| Payment Terms: | T/T |
| Supply Ability: | 50 tons per month |
| Place of Origin: | Zhejiang |
Company Profile
| Location: | Jinhua, Zhejiang, China (Mainland) |
|---|---|
| Business Type: | Manufacturer, Trading Company |
Product Detail
| Model No.: | PKF |
|---|---|
| Means of Transport: | Ocean |
| Brand Name: | GB |
| CAS No.: | E P S |
| Purity: | 92-96% |
| Production Capacity: | 50 tons per month |
| Packing: | wooden boxes |
| Delivery Date: | 60 days after your order |
Product Description
Applicability
PKF-XJ is the raw material of high expansion ratio for the production of low-density beads by one-time expansion and is even suitable for marking lighter plastic foam by several expansion steps. It is therefore most suited to applications requiring densities of less than 18g/l by one time expansion and 10g/l by several expansions. Applications include machinery and electronic product packaging, fishing flotation buoys, crafts, well as light board.
Product Specification
Specification | Bead size(mm) | One-time Expansion | Allication |
PKF-301XJ | 1.00-1.60 | 70-90 | Large packaging, thermal insulation and heat preservation, block, flotation buoy |
PKF-302XJ | 0.85-1.25 | 65-85 | General packaging, thermal insulation and heat preservation, light block |
PKF-303XJ | 0.70-1.00 | 60-75 | Thin article packaging, block |
PKF-401XJ | 0.50-0.80 | 55-70 | Tiny article packaging, block |
PKF-501XJ | 0.40-0.60 | 50-65 | Fine packaging, block |
PKF-601XJ | 0.30-0.50 | 35-50 | Fine packaging |
Outstanding Properties of PKF-XJ
●Fast expanding and high expansion ratio in unit time. Energy -save and efficient.
●Low density after expansion (10.5-15g/l), suitable for low-density products.
●Even lower density after several expansions,satisfying the requirement by low-density block products.
Recommended Processing Conditions
●The processing of EPS consists of pre-expansion, maturing stage, block molding and shape molding.
●If several expansions are needed, the first expansion should be specially noticed controlling the interval between expansions within 3-6 hours (short in summer while long in winter ) in order to avoid the expanded beads being over-shrinked. The time in marturing stage directly influence the highest ratio and hardness of block.
●The low-density block should be removed the inner water in heating room in order to improve the output ratio of block and to make the cut block surface smooth.
Application
