Place of Origin: | Guangdong |
---|
Location: | Shenzhen, Guangdong, China (Mainland) |
---|---|
Business Type: | Manufacturer |
Main Products: | Us To Provide Better Quality Of Laminating |
The optical joint (bonding) technology introduced Ordinary strengthening monitor is in front of the LCD panel with a layer of shielding or protect the glass. There is an air space between the glass and the liquid crystal box, thus from outside to inside to form three reflector: air - glass, glass - air, air - polaroid. If there is no special treatment, every reflection in the face of external light reflectivity roughly 4.5%, three reflective surface reflection of the external light is 13.5%, to 1350 lumens. If the brightness of the screen backlight is 1000 lumens, we can see this is the display picture has run out. Common have the brightness of the light is lower than the reflection of the reinforcement display brightness. The reflected light make white brighter, covered in black and other colors. So the reflected light greatly reduces the contrast, the LCD screen in bright light readability is poor. Optical binding reinforcement displays In order to increase the readability of the LCD screen in bright light, must increase the external contrast of the LCD panel. External contrast and the interior of the LCD contrast are two different concepts. Internal contrast ratio does not consider the surrounding light and reflection, is in the LCD screen surface measuring the ratio of the brightness of white and black; And external contrast observation from a distance, the LCD panel brightness difference. The definition is as follows: External contrast (display through the brightness + the brightness of the reflected light)/reflection brightness From the visible and increase the display backlight brightness and reduce the brightness of the reflected light can increase external contrast values. If you don't reduce the brightness of the reflected light but only increasing the brightness of the backlight would increase the power consumption of the LCD panel, fever will reduce the reliability of the monitor. Therefore, the fundamental method is to reduce the brightness of the reflected light. Man-machine interface minimum external contrast should be greater than 3. Optical adhesive binding after minus reflection shield or protection glass, external contrast is increased, the increase of the external contrast the picture clearly visible. Optical binding not only greatly improve the readability of reinforcement displays under strong light, but also increase the reliability of the reinforcement displays in harsh environment. Its advantages are as follows: Lower reflection loss means a higher contrast. Backlit 500 lumens, sunlight readable; 800 lumens, bright light can read; Backlight means heat reduce power consumption and higher reliability; There is no air gap to eliminate the greenhouse effect of heat up; There is no moisture into the formation of water mist, particles and stolen goods into cause bad points; Joint chemical reinforcement block or protect glass increased the screen shock-resistant, reduce the damage. Even if broken, with optical adhesive will fall off pieces cut; http://www.eeti-touch.com |