Cylinder Head Service Valve Stem Spring Compressor Removal Installer Set 8 16 24

Cylinder Head Service Valve Stem Spring Compressor Removal Installer Set 8 16 24

Description:

Complete upper engine service kit enables in – situ removal and replacement of valve springs and guides / bushings.

To remove and install the valve spring with the cylinder head on or off the OHV and OHC petrol or diesel engines.

Perfect for the removal of valve stem seals on overhead camshaft engines.

Extra-long valve pliers reach down around the valve stem so making access into confined restricted areas perfect and easily reachable.

Suitable for most foreign and domestic cars. 

Suitable for 8, 16 and 24 valve engines.

Content: 

1 x compressed air connector to screw into the spark plug threads either M14 or M18 

1 x compressed air connector to screw into the spark plug threads either M14 or M18 – total length 310mm

1 x diesel injector adaptor M24

4 x compressed air connection fittings for the most common compressed air systems

Round rod for low holder – total length 515mm / diameter 15mm

Traverses holder for a round rod with 7 positioning holes

Valve spring pressure pad

Pressure lever to tighten the valve springs with 5 positioning holes

Mounting screws and pins

Magnetic tools for assembly and disassembly of the valve keys – total length 210mm

2 valve stem seal pliers – straight pliers – total length 270mm and curved pliers length 270mm

Mounting adapter in diameters 5, 6, 7, 8, 10 and 11.4mm M16 knurled

Female extension 130mm for deep seated valves.