Injector Puller Remover Tool Kit Set Bosch Delphi Denso Siemens Diesel Injection

Injector Puller Remover Tool Kit Set Bosch Delphi Denso Siemens Diesel Injection

Description:

Suitable for the fast and safe removal of Bosch, Delphi, Denso and Siemens diesel injectors. Ball joint allows hammer to be used in confined areas. Set includes keys and deep open profile sockets, used to dismantle injectors, plus adaptors for attaching the slide hammer securely to the body of the injector. Supplied in carry-case

Content:

1.   Slide hammer

2.   Handle;

3.   Shaft

4.   Ball joint Adaptor(3 pieces) 

5.   Adaptors(5 pieces-4 internal thread,1 external thread)

6.   External Adaptor

7.   Hex key

8.   Socket

Product Specification:

1.8kg Slide Hammer;

Handle Length 73mm;

Shaft Length 220mm;

Adaptor: M14 x 1.5 for Delphi;

Adaptor: M17 x 1 for Bosch;

Adaptor: M20 x 1 for Denso;

Adaptor: M24 x 1 for Siemens;

Adaptor: M27 x 1 for Siemens;

Adaptor: M27 x 1 for Bosch injector nozzle;

Adaptor: Puller W/M14x 1.5P;

4pcs Injection nozzle socket 100L-25-27-29-30mm 6PT.

Assembly & Operation:

Referring to the individual components in fig.1 assemble the

Injector Puller as shown above in fig.2.

Use adaptor 6 when the injector is being extracted using the

external thread revealed when the injector cap has been

removed.

Use adaptor 5 when the injector is being extracted using the

internal thread revealed when the inner sleeve has been

removed from the injector.

NOTE: Always use the external adaptor first. If by using reasonable force the injector cannot be removed, use the internal

adaptor.

Use of external adaptor. (See fig.3)

Use of internal adaptor. (See fig.4)

Packing details: