user login

60/80A 1P Resin Cut Out Fuse Series With Black Bakelite IEC Safety Standards

Place of Origin: Zhejiang

Company Profile

Location: Wenzhou, Zhejiang, China (Mainland)
Business Type: Manufacturer
Main Products: Single Phase Energy Meter, Three Phase Energy Meter, Din Rail KWH Meter

Product Detail

Model No.: cutout fuse

Product Description

60/80A 1P Cut Out Fuses With Black Bakelite ( Resin Cut Out Fuse)

 

Product Description :

STANDARD CUTOUTS are made of high grade phenolic or resin moulding powder having high mechanical and dielectric strength, The body posses non-hygroscopic and non-tracking qualities. Electrolyic Copper with phosphor bronze back up compression springs capable of providing flawless service for years of use.

 

Features :

1. Adopt building block system to mount auxiliary contactor block, air delay auxiliary contactor,
 thermal overload relay and so on, which can be combined into multiple derived series product.
2. Contactor has the advantage of Small volume, light, low consumption, high life, good safety.
3. Main contactor below 32A has 1 N/C or 1 N/O, there is 1 N/C and 1 N/O above 40A. Contactor can be assembled with F4, F8 auxiliary contact or Time-delay block.
4. Contactor can not only use screw mounting, but also use 35mm[CJX-09~95],75mm [CJX-40~95] and2 x 35mm[CJX-115~170] international standard Din-rail mounting.

 

Specifications

Standard: BS1361 Single phase ( SP) or SPN cut out fuse Black bakelite/Grey resin materials Al or copper conductor

+ STANDARD INSULATED CUTOUTS are engineered to provide complete safety & security to

the users and match with the modern aesthetics.

+ They are designed to safe guard distribution, control and protection from shocks &

accidental touch.

+ STANDARD CUTOUTS match the latest technology anywhere in the world.

 

Working condition:

  •  enviroment temperature is -5 degree~+40 degree.
  • The average temperature in 24 hours shall not exceed +35 degree
  • The altitude of the installation shall not exceed 2000m.
  • The relative humidity shall not exceed 50% when the enviromental temperature is +40 degree.The relative humidity maybe higher at lower temperature condition. The maximun month-average relative humidity is 90% in the most humid month,with a minimun month average temperature +25 degree. The factor that dew may occur on the product surface due to temperature change shall be taken intp consideration.
  • Pollution grade:Grade III.
  • Installation class:III
  • The product shall be installed and operated at a place without obvious shake, impact and vibration.
Post Buying Request