user login

Nanhai Airbag Inflatable Floating Marine Rubber Airbag for Ship Launching Landing

Place of Origin: Zhejiang

Company Profile

Location: Jinan, Shandong, China (Mainland)
Business Type: Manufacturer
Main Products: Pneumatic Fender, Yokohama Fender, Ship Launching Airbag

Product Detail

Model No.: 8

Product Description

Nanhai Airbag  Inflatable Floating Marine Rubber Airbags for Ship Launching Landing

 

Inflatable Floating Marine Rubber Airbags infomation

 

Marine airbags are widely used for ship launching, heavy transportation and marine salvage nowadays. Marine airbags are often called ship launching airbags that indicate the most popular application of these heavy duty airbags is for ship launching. It is estimated that more than 80 percent new built ships who’s DWT below 60,000 are launched by marine airbags.

 

Marine airbags are found to be powerful and versatile tools for many other marine projects such as disembarking ships, heavy transportation, re-floating salvage etc. But how to select suitable marine airbags for a specific project? Let us see suggestions from a professional marine airbags manufacturer and engineering company.

 

 

Airbags used in marine launching specifications:


1. Calculated prepare enough rolling the balloon and the balloon and the traction winch, air compressor, etc.Should be subject to no-load inflatable balloon before using detection (inflation pressure is 1.25 times the safe working pressure), found that after the leakage phenomenon should be repaired in use.
2. Arrange the ship after the road, including berth to ramp.Must level off, remove impurities, pay special attention to hard nails on the ground, with a mouth stones must dig clean, prevent punctured balloon, ramps should have enough length and depth in the water.
3.  Will all the outstanding Angle on the bottom plate, beauty and stern castings such as burr should be smooth.
4. The traction winch wire rope hull.
5.  Close all sea valves, fixed the rudder and propeller.
6.  Dismantle all block, fill in the rolling airbags
7.  Adjust the gasbag internal pressure, make the bottom down to the appropriate work height, don't touch the ground, keep moving ship process generally small boat desirable between 0.2-0.3m.
8.  All the airbag should be aimed at hull center respectively, and the vertical direction of water
9.  Start the traction winch slowly released cables from hull began to move, when the first a bag from the top bottom immediately after carried to the tail, and put in the book bag planned spacing feeding airbags.
10. Repeat the above process, and gradually move the boat to the water, when not feeding balloon blockade river barred to ship.
11.  Relocated, inform the staff on board ready, when the condition such as water depth enough, ordered the wire rope or decoupled fast launching ship.If the river is very narrow water fast enough, can use slow winch cable, let the boat slowly into the water.
12.  Is necessary for some of the larger ships, should install slide device.
13.  Recycle bag

 

 

 

Ship Launching Rubber Airbags Structure


 

 

 

Reference for marine airbag selection  

 

There are two industrial standards for marine airbags in China.: one is product standard named "Air bag for ship up to or down to launching way "; another is technology standard named "Technological Requirements for ship Upgrading or Launching Relying on Air-bags".The latter offer the basic calculation of marine airbags employed in a marine project.

 

According to Chinese industrial standards people will know the approximate quantity and specifications of marine airbags needed for their projects then consult the manufacturer to confirm the design. There maybe optional specifications to be selected for a specific marine project and a good manufacturer should know the best choice. The data of marine airbags' blasting pressure will reveal the product's quality level. For top quality marine airbags, such as one 1.5 m diameter and 7 m length Evergreen marine airbag, the blasting pressure is 0.67 Mpa which indicates the safe coefficient is more than 5 considering its 0.12Mpa working pressure.

 

Full technical service is the qualification of a good company. Although general calculation formula or performance data of marine airbags can be got from most factories but detailed calculations based on mathematic model and experience is more important to the success of marine projects.

 

In a word
Good selection of marine airbags is vital for the success of marine projects. Get basic knowledge of marine airbags selection then consult with manufacturers can help people complete projects in shortest time.

 

Marine Rubber Airbag Specification

 

    Airbags for ship launching and upgrading
     Diameter  D     Operating Pressure              Operating Height       Bearing Capacity Per Meter 
Series Type 0.4D 0.5D 0.6D 0.4D 0.5D 0.6D
S1 S10 0.8 0.20  0.32  0.40  0.48  15.1  12.6  10.0 
1 0.16  0.40  0.50  0.60  15.1 
Post Buying Request