1.5m *2m Sling Type marine boat fenders Black / Grey for Shipyard
| Place of Origin: | Zhejiang |
|---|
Company Profile
| Location: | Jinan, Shandong, China (Mainland) |
|---|---|
| Business Type: | Manufacturer |
| Main Products: | Pneumatic Fender, Yokohama Fender, Ship Launching Airbag |
Product Detail
| Model No.: | 3.3 D X 6.5 L |
|---|
Product Description
1.5m*2m Yokohama floating pneumatic rubber fenders / Sling Type marine boat fenders
1). Simple and low cost installation
The weight of the fenders is supported by the water on which it floats, therefore, the fender can be morred simply by means of a guy rope or chain at minimal cost it can be removed easily to another quay or jetty when not use or transfeered to alternative mooring points as required
2). Chain and tyre net
Almost floating fenders are protected by a chain and tyre net. The purpose of the chain and tyre net is to protec the fender body from damage by sharp objets or protrusions such as rough faced quay walls, to distribute sheer forces along the length of the chain net and to prevent the fender body from having to absorb them.
3). Safety realiability
Xincheng pneumatic rubber fender are constructed using several layers of strong tyre cord are therefore extremely resistant to pressure and cutting, and are therefore extremely resistant to pressure and cutting. The larger size ( 2.5m dia upward ) are fitted with safety valve to prevent accident in the event of over copressiom.
pneumatic marine rubber fender Construction
The fender body is constructed of an inner rubber layer, reinforcing cord layers and an outer rubber layer. All three layers are bonded together by a combination of heat and pressure over a period of time in a vulcanising oven. Once completed, the fenders are pressure tested before relase.
To provide maximum strength and safety, the out skin of submarine fender is thicker than a normal surface fender.
The outer skin rubber compound is desinged and manufactured to be able to withstand both strenuous use and adverse weather. Condations whilst protecting the cord layers and inner rubber the cord layers are corranged at optimum angles designed to be completely airtight.
NANHAI AIRBAG pneumatic rubber fender has widespread application as following:
1,larges shipyards
2,Fender system
3,military ports ,warship
4, larger under water foundations of bridges, etc. ship to ship,ship to wharf,
5,oil tankers, container vessels
6, luxury yachts, ocean platforms
floating pneumatic rubber fender with Tyre&chain net also called pneumatic fender, rubber fender, yokohama fender, made by rubber & multi layer of rubber-dipped tyre fabric, is a leading anti-collision device for marine application in the world today.
|
Vessel Tonnage |
Size (D*L) mm |
Recommend Vessel |
|
50 |
500*1000 |
Fishing Vessel |
|
100 |
700*1500~1000*1500 |
Fishing Vessel |
|
200 |
1000*1500~1200*2000 |
Fishing Vessel, Tugboat |
|
300-500 |
1200*2000~1500*2500 |
Fishing Vessel, Tugboat |
|
1000 |
1500*2500~1500*3000 |
Tugboat, Transport Ship |
|
3000 |
2000*3000~2000*3500 |
Ocean Trawler, Transport Ship |
|
10000 |
2000*3500~2500*4000 |
Transport Ship |
floating pneumatic rubber fender Specifications and sizes :
NANHAI AIRBAG manufactures marine rubber fender with 50kPa (pneumatic 50) and 80kPa (pneumatic 80) initial pressure. The internal pressure, endurable pressure, safety-valve setting pressure and hydraulic test pressure are also in compliance with the requirements of ISO17357:2002.
Other specifications of pneumatic rubber fender are also available upon request of customers.
|
Nominal size (DxL)meter |
Initial internal pressure Po=0.05Mpa |
Initial internal pressure Po=0.08Mpa |
||||
|
Load (kg) |
R (KN) |
Energy (KJ) |
Load (kg) |
R (KN) |
Energy (KJ) |
|
|
0.5x1.0 |
25 |
64 |
6 |
25 |
83 |
8 |
|
0.6x1.0 |
32 |
74 |
8 |
32 |
96 |
11 |
|
0.7x1.5 |
50 |
137 |
17 |
50 |
178 |
24 |
|
1.0x1.5 |
80 |
182 |
32 |
80 |
235 |
44 |
|
1.0x2.0 |
100 |
257 |
45 |
125 |
335 |
63 |
|
1.2x2.0 |
120 |
297 |
63 |
165 |
||