Product Description
Structure:
-The all-steel-structure of SANTEC Press Brakes consist of side frames, RAM, I-Beam type table and pair of levers manufactured from ultrasonically tested steel plates.
-All sections are designed to give minimum deflections and maximum rigidity
-Pair of hydraulic cylinders are synchronized by a heavy duty torque tube welded to the levers. This offers absolute parallelism between them and table working surfaces.
Power Pack Unit:
-The low noise Hydraulic system is designed as per international standards and assembled with internationally reputed make components.
-Valves are mounted on a specially designed compact manifold block minimizing pipings and chances of leakages. The large sized oil reservoir provides adequate cooling.
-Imported sealing kit prevents scratching of bore in case of seal failure and backup seal offers additional sealing enabling to use machine for sometime at a little pressure drop while awaiting seal replacement, thus avoiding downtime.
Other Important Features:
-Repetitive accuracy is with in ± 0.04 mm
-International Quality hydraulic valves rated at 310 bar but working pressure is less than 160bar, this ensure trouble free operation.
-Adjustable five piece guides, provided with special non metallic liners for long life.
-Quick adjustable stroke length.
-Front operated back gauge with micro setting arrangement
-Raw tilting arrangements to maintain bending accuracy over a period.
-Moving work station with on / off buttons, selector switches foe inch, single cycle & auto cycle & emergency stop buttons for easy operation & better safety.
-Rear Cylinder design using mechanical advantage through lever, reduces the cylinder size which allows to use medium pressure hydraulic component & also improves stroke accuracy.
-Fast approach & fast return speed for reducing cycle time, slow pressing speed for better stroke control & bend accuracy.
