FEIFU-668T-H Powder Coating Spray Gun

1.     Features

This  powder coating gun is suitable for the coating of every workpiece, simple, flat workpieces, workpieces with complicated shapes and the over-coating of workpieces which are already coated.

It can coat the objects' deepest corner by charging the powder continuously with low current and high voltage.

It can reduce orange peel effect significantly compare to common Electrostatic Coating machine.

It has four pre-set programs. 

2.     Technical Data

 Electrical data

1.       Power range                                  220V/110V

2.       Frequency                                     50HZ /60HZ

3.       Temperature range in use                      -10 +50 degrees centigrade

Powder Gun

1.       Gun weight:    ^^^                    500g

2.       Rated output voltage ^…                      24VDC

3.       Input voltage     ^^…                       - 200kv

4.       Maximum output current  ^…                   180Ua(max)

5.       Maximum output voltage^^                   0-100KV (  adjustable)   

6.       Maximum powder injection :^…                    600g/min

7.       Polarity ^^^                                negative (-)  

Pneumatic data

1.       Maximum input-air pressure ^^..                 10kg/cm

2.       Optimum input-air pressure^..                        6kg/cm

3.       Minimum input-air pressure   ^                      4kg/cm

4.       Maximum water vapor content or compressed air …..      1.4g/N m3 

5.       Maximum oil vapor content of compressed air   ^..     0.1ppm

6.       Maximum compressed-air consumption^…            13.2 m3/h

Components

1.     Main parts of the whole small manual powder coating machine  

Control unit=1set

Powder spray cup gun=1

Spare parts of gun=(round jet nozzle=1, flat jet nozzle=1 ,deflector=8)

Power cable=1

Earth wire with clamp=1      

Fuse =2

Powder hopper=1

Black venting tube=1

Venting tube connector=1, earth wire=1

 Air tube (8mm)=4

Air tube (6mm)=1