Precision machining bathroom bubble valve

Valve installed in the middle of the pipeline, used to open and close, regulating the flow of media or change the flow direction of the medium. The scope of the building hardware is generally used for water supply and drainage and heating system, nominal pressure is below 1.6MPa, nominal diameter below 100mm. Body made of brass or cast iron, seat, flap, rod

Mostly made of brass. According to use can be divided into the following 5 kinds:

1 cut-off valve: the use of the valve flap for the closure of the pipeline to control the opening and closing of a valve, do not use. Most of the valve disc is made of rubber, good sealing, not easy to leak. Generally used for cold water pipes and need to be installed horizontally.

2: the use of gate valve open and close all piping, with no throttling. Multi band operation hand wheel and handle. Widely used in cold and hot water supply and drainage pipe, can be installed horizontally or vertically.

3 plug valve: also known as the cock. Used for opening and closing the pipeline medium. The switch is rapid, and the opening and closing angle is small, and can be used for a certain degree of throttling. Can be used for low pressure hot water pipe.

4 stool flushing valve: used for flushing the stool with a flat bottom stool. When the handle is wrenched open valve port, the size of the valve opening pressure difference, make the water out of a large number of, feces washed into the sewage pipe; at the same time because of the internal spring and damping system, delay after a few seconds, outlet valve automatically shut down. At least 1.5 to 2.51. When using the requirements of a certain water pressure, generally 0.03 ~ 0.5MPa.

5 floating ball valve: also known as floating valve, float valve, water inlet valve. Is the automatic switching device part of the water tank, high water tower water storage device. Valve is connected with a water inlet pipe, through the valve body is connected to a copper rod on the floating ball movement the valve port of the opening and closing: when the water level rises to a certain height, the floating ball floats up, close the valve port; water level dropped to a certain height, the float drop, open the valve water inlet.

Hardware plumbing products such as: ball valve, butterfly valve, gate valve, globe valve, check valve, ball valve, brass ball valve, stainless steel valve

Filament, vertical rod, pipe fittings, flange welding, bending, lead wire, Ma floor drain, fast, gasket

Water faucet, cold and hot water, nozzle angle valve, gas valve, water meter, pressure gauge, thermometer, hose

Is widely used in commercial buildings, water supply and drainage, municipal, petroleum, chemical, liquefied petroleum gas, mining, power plants, paper, food, pharmaceutical, electronic industries, machinery and equipment, such as matching.

Toilet accessories include the following 4:

1 toiletcommponents: bronze, also known as low water tank water tank back. A wrench, water inlet valve and a water outlet, a floating ball, square bend, toilet and other parts of a card. Series of low water tank fittings installed to sit toilet (toilet) behind the water tank, the water tank for water inlet automatic and manual water drain 2. High water tank accessories: commonly known as squat and fittings, high water tank bronze, high cistern sanitary ware, composed of a handle, a floating ball valve, floating ball, drainage fittings, flushing pipe and other parts of the composition.

3 bidetand accessories: washing device installed in gynecology and (or bidet, bidet), used for washing the anus and genitalia. The woman washing machine is a special washing equipment for women in the bathroom. Bidet Fittings General by mixing valve, a regulation handle and a nozzle, are connected with the cold water pipes and hot water pipes, using single handle or double handle thermostat. Are made of brass, chrome plated. Nozzle is generally installed in the basin or the bottom of the front side and angle can be adjusted, the use of flowing water sprinkler, not easy to cause infection, comply with the hygiene requirements.

4 water jet massage bathtub accessories: the use of inflatable water jet massage bath and massage the various parts of the human body, in order to clean the body at the same time to prevent disease, eliminate fatigue. The corresponding parts are composed of a motor, a pump, an air mixing valve, an adjustable water spraying head and an air switch with an electric shock proof device. Accessories appearance chrome plating or plating all kinds of corrosion resistant color coating.

Our factory:  

Our workshop:  

Our processing equipment:     

Our Test Equipment:  

Our warehouse:

Ningbo Beilun Jiaoyi Factory is specialized in CNC machining parts and die casting fitting.

We can machine include those accessories: CNC machining Lock parts, CNC machining handle parts, door and windows hardware parts, home decoration precision machining parts, CNC machining plumbing parts, precision machining building decoration parts, hardware tools parts, CNC machining bathroom parts, kitchen hardware appliances, precision machining mechanical components, furniture hardware accessories etc.

Please feel free to contact with us.and welcome to visit us at any time.