Low Slackness SWRH77BCr Mild Steel MS Wire Rod for Joint Rods / Netting / Thread Wire

Low Slackness SWRH77BCr Mild Steel MS Wire Rod for Joint Rods / Netting / Thread Wire

Hot Rolled And Cold Finished Mild Steel Wire Rod With variety of qualities, grades

Description

Wire rods are manufactured from billets. This is accomplished by an extrusion process, whereby the red metal bar is pressed into the orifice of a die. The metal is forced against the die by hydraulic rams and the continuous form which emerges takes the shape of the die opening. Sizes vary but are often between 5 – 36 mm in diameter. This semi finished product consists of wire wound into coils each being secured with wire bands. These coils are usually consolidated into units of four coils bound together by metal strapping bands. Each unit is referred to as a ‘unitised bundle of wire rods’. Sometimes the coils are the same size as unitised bundles but the wire in the bundles is continuous. Approximate weights are between 1 – 1,5 tons, and the bundles on average measure about 1m diameter, 1,25 breadth. 

Specification