Hot Runner System Touch screen Temperature Controller for Plastic Injection Machine
| Place of Origin: | Zhejiang |
|---|
Company Profile
| Location: | Wuhan, Hubei, China (Mainland) |
|---|---|
| Business Type: | Manufacturer |
| Main Products: | Coil Heaters, Thermocouple RTD, Mineral Insulated Thermocouple Cable |
Product Description
Touch screen Temperature Controller for Plastic Injection Machine Hot runner System
1. Description
Touch screen Temperature Controller for Plastic Injection Machine Hot runner System offer customized number of control zones and form factors.
This controller is ideal for regular molding machines without sequential fill capability. It allows operators to program the controller according their specific molding needs. Each control zone can be programmed for time-based and/or volume-based injection. The nozzles for each control zone can be graphically shown on the touch screen display.
The time from injection start to packing end (injection plus packing time) is entered into the Close Timer to switch all valves. Individual close times are also available.
12 /24 /36 /48 zones is available
2. Specifications:
|
Ambient temperature : |
32°F to 131°F(0°C to 55°C) |
|
Relative humidity : |
10%-95% |
|
Delivery temperature: |
-40°F to 158°F(-40°C to 70°C) |
|
Power supply |
AC185V-245V,50/60HZ |
|
T/C type: |
J/K |
|
Temperature Unit: |
°C/°F |
|
Temperature control scope: |
45°C to 550°C |
|
Temperature test precision |
+3% |
|
Repeat temperature measure precision : |
+0.1% |
|
Repeat temperature measure precision : |
+0.5% |
|
T/C cooling compensation: |
Dynamic tracking |
|
Noise restrain: |
common mode rejection ratio>100DB, |
|
Sample frequency |
10HZ(100mS) |
|
One point load: |
15A |
|
F1,F2,F3,F4: |
250V-15A(special fuse) |
Table 1 Adjustment period comparisons
|
|
First cycle |
Second cycle |
Third cycle |
|||||||
|
Brand |
Set |
Measured (High) |
Measured (low) |
period |
Measured (High) |
Measured (low) |
period |
Measured (High) |
Measured (low) |
period |
|
MASTIP |
200 |
|||||||||