CC/W33 Spherical roller bearing

• Structure 

Aligning cylindrical bore roller bearing

 Tapered bore spherical roller bearings

lShaker special spherical roller bearings

l Truck bearings

lSingle row self-aligning roller bearings

lDouble sealed spherical roller bearings (with steel sheet seals enhanced films, wear-resistant when used oil)

Aligning cylindrical bore roller bearing

Whether under the inner wall and the use of cage can be divided into CA-and CC-type E-type and four MB type. CA-type self-aligning roller bearing inner ring with two small ribs across the middle without ribs, the cage structure to claw one solid cage, usually copper or carbon steel materials, the structure, bearing large, extra large bearings be used more; CC-type self-aligning roller bearings without inner ring of large and small ribs, roller "bootstrap" for the activities of the middle ring, cage frame for the steel stamping, rolling bearings of the structure sub length increases, increase the rated load, but also has high speed and low friction loss.

Tapered bore spherical roller bearings

Cylindrical hole with a spherical roller bearing characteristics, but the hole is tapered bore, conventional taper 1:12, the model for the basic model bearing added K; but the 240 and 241 series bearings, taper 1: 30, the model After the basic model for the bearing plus K30. Tapered bore bearings can be mounted directly through the nut on the tapered journal, but also through the use of tight sets or sets a fixed shift in the cylindrical shaft.

Shaker with a self-aligning roller bearings

New anti-vibration-aligning roller bearings, mechanical vibration is RNB to host a dedicated research and development of new structures bearing, but also for general mechanical equipment. Performance: high carrying capacity, impact resistance, resistance to vibration, friction, low temperature rise, long service life.

Use of basic form factor, the inner ring in the ribs with fixed,be able to withstand the axial force; cage with a special structure type, the outside diameter of two-way guidance, control and guide the cage and inner space, outer ring runout able to vibration and vibration. Shaker with a self-aligning roller bearings with a post code VA405 signs.

Spherical roller bearings single row

Single row self-aligning bearings are single row, self-aligning roller bearings. They consist of entities with spherical outer ring raceway, with two ribs and cylindrical hole or the inner cone of the entity, and the drum-shaped cage with roller composition. Bearings can not be split.

Single row self-aligning roller bearings particularly suitable for use in the event of high radial shock load, and not a place that must be compensated. See misalignment compensation. The axial load carrying capacity is very small.

Concrete mixer bearings

Customized specifically for the special type of concrete mixer trucks, including 800730,801806,809280,801215 A, 804312A 534176,579905 A, 579905AA, 540626AA.BS2B 248180, CPM2441 XD,

Size range

aligning roller bearing bearing basic dimensions are listed in the data table size,

Diameter size range: 20mm ~ 260mm

diameter size range: 52mm ~ 520mm

 Width range: 18mm ~ 155 mm

Product parameters and model suffix

Margin tolerance

aligning roller bearings precision of P0 and P6 level, there are special requirements for the user also can process P5-class products, tolerance match GB307.1.

Radial clearance

aligning roller bearings with C2, standard (CN), C3, C4 and C5-level interior space, all consistent with the GB4604. Tapered bore spherical roller bearings as standard Zeyi C3 clearance gap. Its value is not suitable for installation and no load bearing. Clearance data please refer to the technical information on this website in the radial clearance