ISO CE Sealed Steel Tooth Tricone Rock Bits for Water / Oil / Mining Well Drilling
| Place of Origin: | Hebei |
|---|
Company Profile
| Location: | Beijing, China (Mainland) |
|---|---|
| Business Type: | Manufacturer |
| Main Products: | Water Well Drilling Rig, DTH Drilling Rig, Anchor Drilling Rig |
Product Detail
| Model No.: | IADC standard |
|---|
Product Description
ISO CE Sealed Steel Tooth Tricone Rock Bits for Water / Oil / Mining Well Drilling
13 5/8"IADC117 API sealed bearing steel tooth tci tricone drill bit for water , oil , mining well drilling
Introduction
Cutting Structure
The wear-resistance of teeth is enhanced with premium tungsten carbide hardfacing on the tooth surfaces for steel tooth bit.
Gauge Structure
Multiple gauge protection with gauge trimmers on the heel and gauge inserts on the gauge surface of the cone, tungsten carbide inserts and hardfacing on the shirttail increases gauge holding capability and bearing life.
Bearing Structure
High precision roller bearing with two thrust faces. Ball lock the cone.Thrust faces hardface with wear resistant alloy. Abrasion resistance and seizure resistance of the bearing are improved.
Seal and Lubrication
Premium O-ring, Optimal seal compression and curved seal structure can enhance the seal performance. The pressure compensator system and advanced grease can greatly increase the lubricating reliability.
Product Application
It is suitable for various formations, and achieves high RPM under low to medium WOB application
Recommended Drilling Parameter
Specification
|
IADC |
WOB (KN/mm) |
RPM (r/min) |
Applicable Formations |
|
114/116/117 |
0.3~0.75 |
180~60 |
Very soft formations with low compressive strength and high drillability, such as clay, mudstone, chalk, etc. |
|
124/126/127 |
0.3~0.85 |
180~60 |
Soft formations with low compressive strength and high drillability, such as mudstone, gypsum, salt, soft limestone, etc. |
|
134/135/136/137 |
0.3~0.95 |
150~60 |
Soft to medium formations with low compressive strength and high drillability, such as medium soft shale, hard gypsum, medium soft limestone, medium soft sandstone, soft formation with harder interbed, etc. |
|
214/215/216/217 |
0.35~0.95 |
150~60 |
Medium formations with high compress strength, such as medium soft shale, hard gypsum , medium soft limestone, medium soft sandstone, soft formation with harder interbed, etc. |
|
227 |
0.35~0.95 |
150~50 |
Medium hard formations with high compressive strength, such as abrasive shale, limestone, sandstone, dolomite, hard gypsum, marble,etc |
|
Note: The upper limits of WOB and RPM in above table should not be used simultaneously. |
|||
Picture
