Place of Origin: | Zhejiang |
---|
Location: | Shanghai, China (Mainland) |
---|---|
Business Type: | Manufacturer |
Main Products: | Mining Ball Mill, Ceramic Ball Mill |
Model No.: | 2.7x7 |
---|
Three Cylinder Industrial Drying Equipment For Iron Ore Powder
Equipment Introduction:
The three cylinder industrial drying equipment improves the internal structure on the basis of single drum
dryer, the pre drying of wet material is added before getting into the dryer and prolong the drying time of
wet material in the dryer. It is widely used in various industries’ slag, clay, coal, iron ore powder, ore
powder, and dry mixed mortar, yellow sand and other mixed materials.
Performance Characteristics:
1. Low outlet air temperature, longer service life of dust removal equipment.
2. Sizes of lump materials, particles, and powders are less than 20mm can be dried.
3. Gear driving is not required and it’s directly driven by roller, with higher mechanical efficiency.
4. Without the phenomenon of air leakage, the sealing difficulty is totally solved, and the installation can
be finished within a few hours.
5. 50% of area covers has been reduced compared with the single drum dryer, and land investment
reduced by 50%, power consumption reduced by 60%.
6. PLC automatic control system can be adopted in the entire system, which contains advanced testing
equipment, thermometer, temperature control device, fault alarm and automatic shutdown protection
etc.
Working Principle:
Materials get into the internal rotary drum from the feeding device, to realize the downstream drying,
materials are lifted up and down constantly by the inner layer lifting plates and the heat exchange is
realized under the form of spiral moving, materials move to the other side of the inner cylinder and then
get into the middle cylinder, and materials are lifted up and moved forward in the middle cylinder, by the
way of two steps forward and one step back, materials absorb the heat both coming from the inner
cylinder and the middle cylinder, meanwhile, the drying time is prolonged, and materials reach optimum
drying status at this stage. Material move the other end of the middle cylinder and then get into the
outer cylinder, the dried materials are quickly discharged from the cylinder under the function of hot
wind.
Technical Parameters:
Model |
Cylinder data |
Capacity(t/h) |
Cylinder rotary speed (r/min) |
Power (kW) |
||||
Outer cylinder diameter (m) |
Outer cylinder length(m) |
Cylinder volume(m3) |
River sand |
Fly ash |
Slag |
|||
S6203 |
1.6 |
1.8 |
3.6 |
2-3 |
1-2 |
1-2 |
3-10 |
4 |
S6205 |
2 |
2 |
6.28 |
4-5 |
2-3 |
3-4 |
3-10 |
5.5 |
S6210 |
2.2 |
2.5 |
9.5 |
8-10 |
4-5 |
6-8 |
3-10 |
7.5 |
S6215 |
2.5 |
2.8 |
13.7 |
12-15 |
7-8 |
10-12 |
3-10 |
11 |
2×4 |
2 |
4 |
12.56 |
8-12 |
4-6 |
8-10 |
3-10 |
3×2 |
2×5 |
2 |
5 |
15.7 |
12-15 |
6-7 |
10-13 |
3-10 |
4×2 |
2×6 |
2 |
6 |
18.84 |
20-25 |
10-17 |
20-27 |
3-10 |
7.5×2 |
2.2×4.5 |
2.2 |
4.5 |
17.09 |
14-18 You Might Also Like |