High Efficiency Ceramic Dry Grinding Ball Mill In Glass Making Industry

Dry type Ceramic Ball Mill with the Aluminum Liner Used in Glass Making Industry

Ceramic ball mill is mainly used in the mixing and grinding the raw material for mixing well,

especially in the common and special materials mixing and grinding.

The sizing of ceramic ball mill and liners as well as grinding media will be chose according to the 

proportion and hardness of materials and capacity required.

Features of ceramic ball mill:

1. Completely enclosed welded design in high-grade steel.

2. Direct drive via bearing journal with top-mounted gearbox.

3. Motor connected to gearbox via a V-belt drive.

4. Product discharge via slots located around the periphery of the drum

Working Principle:

Materials spirally and evenly go into the first cabin of the grinding machine through the feeding hollow

shaft from the feeding device, and inside the first cabin, there are ladder lining boards or ripple lining

board in which there are many steel balls with different specifications. The cylinder rotates and produces

eccentric force to bring the steel balls to a certain height, and then the steel balls will fall down to impact

and grind the materials. After being coarsely ground in the first cabin, the materials will go through the

single-layer partition board and into the secondary cabin in which there are flat lining board, and in the

lining board there are steel balls to further grind the materials. Finally the powdery materials will be

discharged from the discharging grating bar to complete the powder grinding process.