30 micron aperture stainless steel dutch wire mesh

Stainless steel wire mesh

1.Product Description of Stainless Steel Wire Mesh

    Plain Weave Each weft wire passes over one and under one warp wire, and each warp wire

passes over one and under one weft wire, every weft wire have and warp wire the same diameter.

    Characteristics: square aperture ,high flow through , relative high open area, as result less pressure

drop during filtration suitable for all kinds of filtration up to 63 µm.

    Twill Weave Each weft wire passes alternately over two, and then under two successive warp

wires and each warp wire passes alternately over two and under two successive weft wires. It is

possible to be used to allow a heavier than standard wire diameter.We can supply the mesh from

30 mesh to 500 mesh. 
    Characteristics: square aperture, less rigid than plain weave, especially suitable for deforming,

strong wire cloth due to ratio of wire diameter and aperture, it is mostly used for filtration less than

63 μm.

1.Material: AISI 202/304/316/304L/316L, etc.

2.Wire Dia:0.02--2.0mm.

3.Mesh:8--400mesh. 

4.Aperture(micron):25--500μ

5.Specification

Remark: customized order available

Application

Because of the acid,alkaline,wear-resistant,heat-resistance properties, stainless steel mesh is

usually used in acid,alkali environment, screening and filtration, as slurry net in petroleum industry,

chemical fiber industry,electroplating industry for pickling net,industry and the construction industry,

filter sand,filtering liquid and gas,aerospace,petrochemical,chemical and other industries.can also

be ued for mechanical attachment security,etc.,but it can also be used to replace the wooden walls

and ceilings made.