FPC Front - End Material High Precision RA Copper Foil for Printed Circuit Board

Place of Origin:	Guangdong

Model No.:	AIA-1

Treatment Rolling Copper Foil Used In FCCL Has High Elongation

Applications:

(1) Flexible Copper Clad Laminate(FCCL)

(2) Fine Circuit FPC

(3) LED coated crystal thin film.

(4) Adhesion Tape

(5) Anti - Peel devices and so on

Normal Specification:

(1) Thickness: 0.012mm / 0.018mm / 0.035mm

(2) Width: 260mm / 520mm and so on .

Performances:

(1) High flexibility and extensibility

(2) Even and smooth surface

(3) Good fatigue resistance

(4) Strong antioxidant properties

(5) Good mechanical properties

(6) The material has higher extensibility

(7) It has a high bending resistance

(8) It has no crack.

Table 1 :

Table 2 :

Item		Unit	Parameters
Item		Unit	12μm	18μm	25μm	35μm	70μm
Mass per unit(±5%)		g/m²	105	160	300	400	445
Cu+Ag		%	≥99.99
Temper			H	O,H	O,H	O,H	O,H
Surface roughness	Ra	μm	0.13	0.12	0.1	0.08	0.08
Surface roughness	Rz	μm	1.3	1.0	0.8	0.74	0.76
Tensile strength	Normal Temp /23	N/mm²	≥430	≥450	≥450	≥450	≥450
Tensile strength	High Temp /220	N/mm²	≥140	≥150	≥170	≥210	≥220
Elongation	Normal Temp /23	%	≥1.5	≥3.0	≥4.0	≥4.2	≥4.5
Elongation	High Temp /220	%	≥8	≥10	≥18	≥28	≥30
Fatigue Resistance (annealed)		%	65	65	65	65	65
Maximum resistivity		Ωmm2/m	0.0181
Electrical conductivity		%	≥98.3%
Film and adhesive layers		Instant Temp. 300/10s	Film and adhesive paste after transient temperature without blistering delamination.
Anti oxidation	H.T.(200)	Minute	Won’t Change the Color within 60 minutes
Pinhole test results		piece/ m²	Pinhole area more than 0.5 mm²,0.005 piece/ m²

Note:

1. Above figures based on the material with 0.05mm in thickness and 600mm in width.

2. Normally, Copper, cobalt and nickel is coated on the rough surface.

3. Testing method follows our company standard.

Table 3 :

Application and Performance :

Post Buying Request

Contact Supplier