Low Power Consumption Electric Induction Melting Furnace With Capacitor Cabinet

Low Power Consumption Metal Induction Melting Furnace / Electric Furnace , Temperature Holding
 
 
We can produce medium furquency induction furnace from 0.1T to 10T.
 
Description
 
1. Using a zero voltage scanning soft start mode, in any case may at any time to start or stop, 
will not have impact on power supply.
2. Fast smelting with low production cost; low-pollution and environment-friendly ;
3. A direct effect from the cold furnace melting. Dissolved material will be fully dumped clean. 
5. Molten material easy to replace.
6. Power adjustment flexibility. Be able to continuously smooth adjustment. 
7. Temperature uniformity can be easily controlled. Oxidation burning less. Metal components evenly.
 
 
Structure Features
 
1. Solid aluminum structure and durable;
2. Good magnetic isolation, safe and reliable;
3. Solid frequency conversion power supply, easy operation; Adjustablepower rate, easy operation
    and maintenance;
4. Easy to start up with load or free of load.
 
 
Equipment Constitution
 
Furnace block, l Mechanical mechanism, Operation table, Low voltage power supply system electro 
thermal capacitor cabinet, Water temperature and pressure annunciator water cooling cables, Furnace 
leakage alarm.
 
 
Features
 
1. 1, 600 centigrade
2. SCR static frequency conversion adopted as IF power supply for induction heating
3. Pouring action driven mechanically or oil hydraulic
4. High efficiency, little noise, easy operation and maintenance
5. Usage:Refining ferrous metals, smelting nonferrous and precious metals, such as Cu and Al
 
 
Specification
 

  
 
Installation
 
1. Under the following conditions are satisfied, the seller’s installation and construction team will start equipment installation and commissioning for a period of four weeks.
2. Infrastructure installation, civil construction, maintenance have been completed, and meet theinstallation requirements.
3. The cooling water pipes are connected in place. Pressure and flow meets the seller’s demand.
4. The lifting equipments are placed to cope with the construction in the suitable condition.
Note: Equipment installation will be in accordance with the plan graph agreed by the related sides. The buyer can decide the installation location according to the site conditions, including cooling towers, transformers and other equipments, which should be within a reasonable distance;
 
 
Others
 
1. When 3 set coils with different size,it can be customized free.
2. The graphite / Zirconia crucible can be provided to match different melting materials, weight and size.
3. When you choose furnace,pls consider the melting material, weight and size.
4. The melting material decides the crucible material. The weight and size decides the crucible size.
5. If you need install the IR thermodetector to the furnace, we can provide a built-in port on the furnace for convinient connection.
 
Complete set supply range
1. Furnace body ,hydraulic tilting device
2. Water cooling cable
3. Medium frequency power supply
4. Capacitor cabinet
5. Low voltage power control cabin