2016 Competitive Price fluorite powder briquette machine

Fluorite powder briquette machine

1.    Product introduction:

Fluorite powder pressure ball machine after years of industrial use and improvement, compared with other similar products, fluorite powder pressure ball machine with ball rate is high, and the consumption power small, compact and easy to maintenance and debugging advantages is an ideal pressure ball, granulating equipment.

Fluorite powder pressure ball machine with briquette ball press machine, desulfurization gypsum pressure ball machine performance is similar, cocoa of fluorite powder, slag, metal powder, coal, coke powder and other materials suppression, shape them. Has good wear resistance due to the on and forced extrusion, so the products with high density, high strength, high hardness of the three characteristics, and the machine pressure and the 650mn hard materials. It can effectively improve the service life of the roller.

2.    Working principle:

Forming machine is the key structure of fluorite powder press, its design is reasonable directly affects the quality and taste of fluorite powder. Fluorite powder pressure ball machine, molding machine main models is the roll forming machine (that is, people often say that the pressure ball machine), it has a pair of axis parallel to each other, the same diameter, each other a certain clearance of cylindrical type wheel, wheel has hemisphere with the same shape and size and regular arrangement of the fossa, wheel type is fluorite powder pressure ball machine molding machine main parts. Under the drive of the motor, two type wheel with the same speed, rotating in opposite directions, when material falls one type two wheel at the combination is being pressed. At this time, the raw material between the two corresponding ball produced volume compression; wheel type continuous rotation, ball and socket are gradually closed, molding pressure gradually increased, when the rotating two ball distance the least molding pressure reaches is the maximum. Then type wheel to rotate and gradually separated, forming pressure decreases rapidly with the. When the molding pressure is reduced to zero, the fluorite powder is pressed to start the expansion of the separation, complete fluorite powder press ball machine to suppress the whole process of fluorite powder into the ball.3.

3.    Material requirement:

1. Material granularity in 80-200 mesh.

2. Material is not allowed to have any metal; otherwise it will damage the surface of the roller.

3. Feed must meet, so the ball will guarantee rate. Need to remind the user is that of metal powder press the ball into the group, on the leather roller wear is relatively severe,   users in the purchase of fluorite powder pressure ball machine, special attention should be paid to the material of the leather roller, the best selection of wear-resistant alloy forging.

4.    Installation and commissioning:

1. Attention should be paid to the vertical and horizontal vertical.

2. Fluorite powder ball pressure machine equipment should be installed in the level of concrete foundation, fixed with anchor bolts.

3. After installation, check the bolt of every part of the fluorite powder press, whether it is loose or not, and whether the main door of the machine is fastened.

4. Power line and control switch for power distribution according to the device of fluorite powder press.

5. Inspection is completed, the empty load test, the normal test can be carried out.

Gongyi Fu Yu Machinery Co., Ltd. is specialized in the production of pressure ball machine, welcome to consult the factory, telephone 86-18538292735, http://www.ball-press-machine.com. E-mail:fybriquettemachine@yahoo.com.