200kw / 250 kva Brushless Alternator Generator Four Pole With CE / ISO Certification
Our Features :
1) four-pole brushless self-excited, drip proof structure.
2) The stator, wound in 2/3 pitch, can effectively inhibit the waveform distortion of the output voltage, and reduce the heat of the magnetic field.
3) The rotor will reduce the voltage deviation and temperature rise under non-constant load with the assistance of dynamic balance and the impeccable damper before assembly.
4) The output power of the exciter rotor will supply the main rotor through a three-phase full-wave bridge rectifier, which is protected by a surge suppressor, in order to avoid damage from the shock caused by the out-of-step phase on short circuit or in parallel.
5) Automatic Voltage Regulator has the characteristics to protect he automatic load-shedding function of an engine. It will quickly reduce the output voltage of a genset if the engine speed is lower than the normal speed, which helps the engine or prime mover recover rapidly in the sudden heavy load.
Technical Specifications :
| Control System Ser.4 |
Separately Excited by P.M.G. |
| A.V.R |
MX321 |
MX341 |
| Voltage Regulation |
±1.0% |
±1.0% |
| Control System Ser.4 |
Self Excited |
| A.V.R |
Standard SX460 |
Optional AS440 |
| Voltage Regulation |
±1.0% |
±1.0% |
| Insulation System |
Class H |
| Protection |
IP23 |
| Rated Power Factor |
0.8 |
| Stator Winding |
Double Layer Concentric |
| Winding Pitch |
Two Third |
| Winding Leads |
12 |
| Stator Wdg. Resistance |
0.166 Ohms Per Phase at 22°C Series Star Connected |
| Rotor Wdg. Resistance |
0.92 Ohms at 22°C |
| Exciter Stator Resistance |
18 Ohms at 22°C |
| Exciter Rotor Resistance |
0.068 Ohms Per Phase AT 22°C |
| Maximum Overspeed |
2250 Rev/Min |
| |
1 BEARING |
2 BEARING |
| Weight Comp. Generator |
850 kg |
885 kg |
| Weight Wound Stator |
370 kg |
370 kg |
| Weight Wound Rotor |
324 kg |
301 kg |
| WR² Ineria |
3.5531 kgm2 |
3.3543 kgm2 |
| Shipping Weight in a crate |
920 kg |
945 kg |
| Packing Crate Size |
155 x 87 x 107(cm) |
155 x 87 x 107(cm) |
| |
50 Hz |
60 Hz |
| Telephone Interference |
THF<2% |
TIF<50 |
| Cooling Air |
0.8 m³/sec 1700 cfm |
0.99 m³/sec 2100 cfm |
| Voltage Series Star |
380/220 |
400/231 |
415/240 |
440/254 |
416/240 |
440/254 |
460/266 |
480/277 |
| kVA Base Rating for Reactance Values |
250 |
250 |
250 |
250 |
285 |
300 |
315 |
315 |
Standard :
Global Power industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as BS5000, VDE 0530, NEMA MG1-32, IEC34, CSA C22.2-100, AS1359.
Other standards and certifications can be considered on request.
Voltage Regulator:
SX460 AVR - STANDARD
With this self excited control system the main stator supplies power via the Automatic Voltage Regulator
(AVR) to the exciter stator. The high efficiency semiconductors of the AVR ensure positive build-up from initial low levels of residual voltage. The exciter rotor output is fed to the main rotor through a three phase full wave bridge rectifier. This rectifier is protected by a surge suppressor against surges caused, for example, by short circuit.
Terminals & Termianl Box:
Standard generators are 3-phase reconnectable with 12ends brought out to the terminals, which are mounted on a cover at the non-drive end of the generator. A sheet steel terminal box contains the AVR and provides ample space for the customers' wiring and gland arrangements. It has removable panels for easy access.
Our Picture:
Guarantee:
1) Guarantee Period: One year or 1000 running hours whichever comes first.
2) During the guarantee period, the spare-parts will be sent through your shipping agency in China.
3) Spare-parts can also be sent by air express.
4) 24 hours service hotline is available for customers.
Our Service :
1. If you are interested in our products we sincerely invite you to take a visit of our factory when you are in China. We can drive to pick you up and visit our factory.
2. Suggest the best choice or referential suggestion based on customers’ information. Answer all questions about the product from customer.
3. Build customers’ profiles, follow-up service, make regular calls on customer
