Full Synthetic Cutting Fluid for general machining of metal cutting machine tool
| Place of Origin: | Guangdong |
|---|
Company Profile
| Location: | Changzhou, Jiangsu, China (Mainland) |
|---|---|
| Business Type: | Manufacturer |
| Main Products: | Zinc Flake Coating, Water Based Top Coat, Dip Spin Coating Machine |
Product Detail
| Model No.: | AIA-1 |
|---|
Product Description
Product brief
This product is a fully synthetic cutting fluid,mainly used for grinding,have a good effect on processing of carbon steel, copper alloy in the common grinder,creep grinder, precision grinder.It is suitable for general machining of metal cutting machine tool by properly increasing the concentration.
Product features:
MCF-101 is clear liquid
2,Be composite by high performance synthetic lubricants, anti-rust agent, and several additives, with excellent thermal stability
3,Excellent cooling and cleaning performance,long anti-rust period,and has good lubricity
4,Do not contain sodium nitrite, sulfur, chlorine and additives including phenol, does not stimulate the skin, do not pollute the environment
5,Good hard water resistance performance,low foam
6,Contain unique lubrication additives,can greatly improve the machining accuracy, extend the life of the grinding wheel
Technical parameters
|
Item |
Quality index |
Test method |
|||
|
Original solution appearance,15~35
|
Yellowish-green liquid |
GB/T6144 5.2 |
|||
|
Diluent(5%) |
Defoaming ability mL/10min |
≤2 |
GB/T6144 5.6 |
||
|
pH |
9.010.0 |
GB/T6144 5.5 |
|||
|
Corrosion test,full immersion,55±2 |
First grade grey casting iron |
24 |
GB/T6144 5.8 |
||
|
T3 Red copper |
24 |
||||
|
H62 Brass |
24 |
||||
|
Anti-rust test |
First grade grey casting iron 35±2 |
single |
24 |
GB/T6144 5.9 |
|
Instructions:
1,Recommended concentration:single machine: 3 ~ 5% thinners;central fluid supply: 5 ~ 10% diluent ,concentration can be adjusted according to processing requirements
2,Preparation methods:use clean water dilute this product,fully stirring,then can be used
3,Use (change)of new fluid method: before using the new liquid,clean the storage tank and piping circulation(with concentration diluent and adding bactericide 0.3 ~ 0.5%),at last add the productt evenly circulation can be used
4,Tank liquid supply or maintenance: when need supply tank need supply,should add water with corresponding percentage of original solution,should clean the oil slick in the tank liquid during use, regularly test PH value of tank liquid, when the PH value is less than 8.5, should supply or change new solution.
Attention:
1,Machine tool should be complete filter, slag system, timely removal of scrap metal, oil slick and other impurities, if not many days to start the machine tool,if machine downtime for a long time,should air circulation and oxygen filling tank on a regular basis.
2,Central fluid feeding and central cooling system,should be detailed operational procedures,that person is responsible for operation.maintenance and management.
3,Mixed with other brand cutting fluid is prohibited
4,This product should be stored in a dry, cool and ventilated inside storeroom, leakage should be avoided in the sun, rain, 5 ~ 35 storage temperature.If improper storage cause the product status changes, restore specified storage temperature after mixing, and then dilute liquid, does not affect the processing performance, can be used normally.
Other matters:
1,Package:25kg/plastic drum,200kg/plastic drum,1000kg/plastic drum
2,Shelf life:two years
