Place of Origin: | Guangdong |
---|
Location: | Wenzhou, Zhejiang, China (Mainland) |
---|---|
Business Type: | Manufacturer |
Main Products: | Intelligent Electric Actuator, Electric Rotary Actuator, Waterproof Electric Actuator |
Model No.: | AIA-1 |
---|
On-off electric Rotary actuator 90 degree 200NM IP67
Summary:
An electric Rotary actuator is powered by a motor that converts electrical energy into mechanical torque. The electrical energy is used to actuate equipment such as multi-turn valves. It is one of the cleanest and most readily available forms of actuator because it does not involve oil.
Performance Feature
Shell--The sheel is made of aluminium alloy, with anodic oxidation treatment and polyester powder coating. It is strong corrosion-resistang and enclosure IP67,NEMA 4 and 6, IP68 is optional.
Motor--Fully enclosed squirrel-cage asynchronous motor, small, large torque, and small inertia force, F-class insulation rating, with termal protection to avoid damaging.
Manual Structure--The design of handle is safe,reliable,labor-saving,small.If power failure, operted by handle.
Indicator--Install indicator in the center shaft and adopts convex mirror design, no cumulate water, more convenient to observe.
Space heater--It is used for controlling temperature to avoid condensing internal of housing and keep dry.
Sealing--Well sealing performance and enclosure IP67,IP68 is optional.
Limit switch--Mechanical, electronic double limit. Mechanical limit stopper are adjustable, safe and reliable; electronic limit switch is controlled by cam, Set position accurately and conveniently, and not affected by excessive handle.
Self=locking--Accurate worm and worm gear transfer large torque efficiently, high efficiency, low noise (Max. 50dB), long life, with self-locking, prevent inversion, as stable and reliable transmission parts, no need to refuel.
Anti-offbolt--the bolt attached to the shell and be not off when remove the shell.
Installation--The installation size meets international standard ISO5211/DIN3337
Circuit--Controlling circuit meets the single-phase or three-phase power supply standard, circuit layout is reasonable and compact, terminals meet various of additional functional requirements effectively.
Performance Parameter
Model |
AOX-020 |
|
Max outputer torque (NM) |
200NM |
|
Operating Time 90°(S) |
30S |
|
Driver Shafe (mm) |
Square |
22*22 |
Deep |
26 |
|
Round |
22.13 |
|
Deep |
45 |
|
Motor (W) |
45W |
|
Rated Current (A) 220VAC/1ph |
0.3A |
|
Wight (kg) |
13KG |
Standard Technical Parameter
Shell |
Aluminum alloy Shell, Enclosure:IP67,IP68 is optional |
|
Power |
Standard:220VAC/1ph |
|
Controlling power |
110/220VAC/1ph,50/60 Hz, ±10% |
|
Motor |
Squirrel-cage asynchronous motor |
|
Limit switch |
2×Open/ Close, SPDT,250VAC 10A |
|
Auxiliary limit switch |
2×Open/ Close, SPDT,250VAC 10A |
|
Travel |
90°270°±10°(Please specify in advance if over 90°) |
0°270° |
Fail safe/ |
Internal-placed thermal protection, Open 120 ±5/Close 97 ± 5 |
|
Indicator |
Continuous situation indication |
|
Manual operation |
Mechanical handle(Hand wheel is optional ) |
|
Self-locking device |
Self-locking by worm and worm gear |
|
Mechanical limit |
2 x external adjustable stopper |
|
Space heater |
7-10W (110/220VAC) Anti-condensation |
Optional |
Conduit entries |
2 Pieces M18 |
|
Ambient temperature |
-20--+70 |
|
Lubrication |
Grease moly(EP type) |
|
Material |
Steel, Aluminum alloy, Aluminum bronze, Polycarbonate |
|
Ambient humidity |
Max 90 RH |
Non-Condensing |
Anti-vibration |
X Y Z 10g,0.234 Hz,30 minutes |
|
External coating |
Dry powder, Epoxy polyester |
|
General Drawing:
AOX-020
Factory Photo: