Supply 25CrMo4 alloy structural steel

25CrMo4 high hardenability, temper brittleness, weldability is quite good, cold cracking tendency to form small, can be a good machinability and cold strain plasticity. Usually in the quenching or carburizing state use.

25CrMo4 Correspond steel:

AISI 4125,GB20CrMo

25CrMo4 chemical composition(％):

C: 0.22 ~ 0.29

Si : 0.10 ~ 0.40

Mn: 0.60 ~ 0.90

S: to allow the residual content of ≤0.035

P: allow the residual content ≤0.035

Cr: 0.9～1.2

Ni: to allow the residual content ≤0.030

Cu: to allow the residual content of ≤0.10

Mo: 0.15～0.3

25CrMo4 Mechanical Properties:

Tensile strength σb (MPa): ≥885 (90)

Yield strength σs (MPa): ≥685 (70)

Elongation δ5 (%): ≥12

Impact energy Akv (J): ≥35

Round bar : Diameter : 1mm-2000mm

Square bar :Size: 50mm * 50mm～600mm *600mm

Plate steel/flat bar :Size: Thickness: 0.1mm～800mm Width: 10mm to 1500mm

Tube/pipe: Size: OD: 6-219mm WT: 1-35 mm.

Cold-rolled sheet: Thickness: 2-5mm Width:1000mm Length: 2000mm

Hot-rolled sheet: Thickness:6-80mm Width: 210-610mm

Length: We can supply any length based on the customer's requirement.

Application:

 25CrMo4 alloy steel is used in the manufacture of non-corrosive medium and temperature lower than 250 ℃, high-pressure pipes and all kinds of fasteners medium containing a mixture of nitrogen and hydrogen to work, higher carburizing parts such as gears, shafts, etc .We serve you with our honesty, integrity, and professionality .

Contact sales:

Website : http://www.firsteelplate.com/

Email : seedsteel@hotmail.com

Tel : +86-371-55031185

Fax: +86-371-86220366