cheap 37MnSi5 alloy structural steel

37MnSi5 is a better performance, more economical alloy quenched and tempered steel. After quenching with high strength and abrasion resistance, and has good toughness and stamina strength, it is also good machinability, cold plastic deformation Medium

37MnSi5 Correspond steel:

GB:35SiMn

37MnSi5 chemical composition(％):

C: 0.32~ 0.40

Si : 1.1 ~ 1.4

Mn: 1.10 ~ 1.40

S: to allow the residual content of ≤0.35

P: allow the residual content ≤0.35

Cr: to allow the residual content of ≤0.30

Ni: to allow the residual content ≤0.30

Cu: to allow the residual content of ≤0.30

37MnSi5 Mechanical Properties:

Tensile strength σb (MPa): ≥885 (90)

Yield strength σs (MPa): ≥735 (75)

Impact energy Akv (J): ≥47

Round bar : Diameter : 1mm-2000mm

Square bar :Size: 50mm * 50mm～600mm *600mm

Plate steel/flat bar :Size: Thickness: 0.1mm～800mm Width: 10mm to 1500mm

Tube/pipe: Size: OD: 6-219mm WT: 1-35 mm.

Cold-rolled sheet: Thickness: 2-5mm Width:1000mm Length: 2000mm

Hot-rolled sheet: Thickness:6-80mm Width: 210-610mm

Length: We can supply any length based on the customer's requirement.

37MnSi5 Application:

37MnSi5 is mainly used in the manufacture in quenched state medium speed, medium load of parts under; or in the quenched and tempered state as a high-impact load and small parts, can also be used and the need for greater cross-sectional surface hardening parts. In the general machinery industry, the steel for the manufacture of transmission gears, spindles, spindle, shaft, rod, worm, electric axles, generator shaft, crankshaft, flywheel and size forgings; in turbine manufacture, is used as the operating temperature the following 400 ℃, diameter less than 250mm spindle and hub, and a variety of important impeller fastener thickness less than 170mm; in the manufacture of agricultural machinery and more to handle hoe shovel, plow House and other wear-resistant parts. Also used as a thin-walled seamless steel pipe.

We serve you with our honesty, integrity, and professionality .

Contact sales:

Website : http://www.firsteelplate.com/

Email : seedsteel@hotmail.com

Tel : +86-371-55031185

Fax: +86-371-86220366