supply 36Mn5 alloy structural steel

36Mn5 (1.0473) is a kind of moderate strength alloy structural steel, 36Mn5 has cold deformation plasticity, good low temperature performance, compared with the corresponding carbon content of steel, 36Mn5 has high hardenability.

36Mn5 Correspond steel:

AISI 1335,JIS SMn438,GB 35Mn2

36Mn5 chemical composition(％):

C: 0.32 ~ 0.39

Si : 0.17 ~ 0.37

Mn: 1.40 ~ 1.80

S: to allow the residual content of ≤0.025

P: allow the residual content ≤0.025

Cr: to allow the residual content of ≤0.30

Ni: to allow the residual content ≤0.30

Cu: to allow the residual content of ≤0.25

36Mn5 Mechanical Properties:

Yield strength σs (MPa): ≥685

Elongation δ5 (%): ≥12

Impact energy Akv (J): ≥55

Round bar : Diameter : 1mm-2000mm

Square bar :Size: 50mm * 50mm～600mm *600mm

Plate steel/flat bar :Size: Thickness: 0.1mm～800mm Width: 10mm to 1500mm

Tube/pipe: Size: OD: 6-219mm WT: 1-35 mm.

Cold-rolled sheet: Thickness: 2-5mm Width:1000mm Length: 2000mm

Hot-rolled sheet: Thickness:6-80mm Width: 210-610mm

Length: We can supply any length based on the customer's requirement.

Application:

36Mn5 (1.0473) is generally used as part of a small cross-section, and 20Cr steel equivalent, can be used for carburized pinion, small shafts, steel sleeve, piston pins, engine sleeve, automobile steering wheel shaft, valve push rod, etc; also It can be used for quenched and tempered steels, such as cold heading bolt or larger cross-section of quenched and tempered parts.

We serve you with our honesty, integrity, and professionality .

Contact sales:

Website : http://www.firsteelplate.com/

Email : seedsteel@hotmail.com

Tel : +86-371-55031185

Fax: +86-371-86220366