.jpg)
CWDM XFP 10Gbps Optical Transceiver Module
1.0 USD
| Place of Origin: | Sichuan |
|---|
Company Profile
| Location: | Chengdu, Sichuan, China (Mainland) |
|---|
Product Detail
| Model No.: | CWDM XFP 10Gbps Optical Transceiver Module |
|---|---|
| Brand Name: | SFP-XFP |
Product Description
The Eoptolink EOLX-1696-XX series optical CWDM XFP transceiver is designed for fiber communications application such as 10G Ethernet (10GBASE-ER/EW) and 10G Fiber Channel (1200-SM-LL-L), which fully compliant with the specification of XFP MSA Rev 4.5.
This module is designed for single mode fiber and operates at a nominal wavelength of CWDM wavelength. There are eighteen center wavelengths available from 1270nm to 1610nm, with each step 20nm. A guaranteed minimum optical link budget of 14dB is offered.
The module is with the XFP 30-pin connector to allow hot plug capability. Only single 3.3V power supply is needed. The optical output can be disabled by LVTTL logic high-level input of TX_DIS. Loss of signal (RX_LOS) output is provided to indicate the loss of an input optical signal of receiver.
This module provides digital diagnostic functions via a 2-wire serial interface as defined by the XFP MSA Rev 4.5
This module provides digital diagnostic functions via a 2-wire serial interface as defined by the XFP MSA Rev 4.5
Features
- Supports 9.95Gb/s to 11.1Gb/s BitRates
- Hot-Pluggable XFP Footprint
- Compliant with XFP MSA
- 18-Wavelengths CWDM EML Transmitterfrom 1270nm to 1610nm, with Step 20nm
- 14dB Power Budget at Least
- Duplex LC Connector
- Power Dissipation < 3.5W
- Built-in Digital DiagnosticFunctions
- Case OperationTemperature Range -5°C to 70°C
Applications
- 10GBASE-ER/EW 10G Ethernet
- 1200-SM-LL-L 10G Fiber Channel
- SONET OC-192 IR-2
- SDH STM S-64.2b
- SONET OC-192 IR-3
- SDH STM S-64.3b
- ITU-T G.709
As defined by the XFP MSA, Eoptolink XFP transceivers provide digital diagnostic functions via a 2-wire serial interface, which allows real-time access to the following operating parameters:
- Transceiver temperature
- Laser bias current
- Transmitted optical power
- Received optical power
- Transceiver supply voltage
It also provides a sophisticated system of alarm and warning flags, which may be used to alert end-users when particular operating parameters are outside of a factory-set normal range.
Contact details:
Robert Lee
Eoptolink AT gmail com
Cis AT eoptolink com
msn: eoptlink_sfp AT hotmail com
skype: eoptolink-sfp
