Place of Origin: | Guangdong |
---|
Location: | Foshan, Guangdong, China (Mainland) |
---|---|
Business Type: | Manufacturer |
Main Products: | Acetoxy Silicone Sealant, Neutral Silicone Sealant, Bathroom Silicone Sealant |
Model No.: | AIA-1 |
---|
Cartridge Packing Neutral Silicone Sealant Heat Proof One - Component
Features
Glass Silicone Sealant, Base :Silicone, Size: 10.1 Oz., Container Type: Tube , Color: White, Specific Gravity: 1.02 , Performance Temperature: Range: 40 Degrees to 120 Degrees F, Substrates: Widely used for sealing glass assembly, aquarium, aluminum-plastic plate curtain wall, roof skylight daylighting, cabinets, display cabinets adhesive sealing and many construction of industrial use. Full Cure: 24 hours. Application Time: 30 minutes. Application Temperature Range: -65 Degrees to 400 Degrees F, Characteristics : Will not shrink or crack , Weatherproof / Mildew Resistant , 30 minutes Tack free time, VOC: 27 g/L, For Use with : Standard Caulk Gun, A & O test requirements , green environmental Attribute : Product Contributes to reducing energy consumption.
Color : White
Caulks and Sealant
Main Purpose:
Use for structure's assembly of glass curtain wall. It can sealing the glass and metal's surface to a single assembly components directly. It can meet the requirement of fully-hidden or semi-hidden frame curtain wall design; It's suitable for the insulating glass structural's second layer's sealing. The site that particularly high requirements on the sealing performance, and multi-purpose ;
Restriction of Usage:
Unsuitable used on the material's surface that leaking grease, plasticizeror solvent. It should be used in the ventilated places, because the silicone sealant need to absorb the moisture in the air for drying. Unsuitable used for frost or wet surface. Unsuitable used for construction on the material's surface that the temperature lower 6 or higher than 40. Unsuitable used for construction on the unclean and uptight substrate's surface. Unsuitable used for the interface of ground that bears the structural strength or the ground damage by excessive physical.
The hollow glass second layer sealing and joints ;
Main Technology Data:
Performance | Standard | Measured Value | Testing Method | Performance | Standard | Measured Value | Testing Method | |
Slumpability | Horizontal | Not change shape | Not change shape | GB/T 13477 | Tensile proper(MPA)at 90 | ≥0.45 | 0.87 | GB/T 13477 |
Vertical(mm) | ≤3 | 0 | GB/T 13477 | Tensile proper(MPA)at 30 | ≥0.45 | 1.65 | GB/T 13477 | |
Pot life when 20Mins | ≥10 | 3.3 | GB/T 13477 | Tensile proper(MPA)after flooding | ≥0.45 | 0.99 | GB/T 13477 | |
Skin time(Hours) | ≤3 | 1.2 | GB/T 13477 | Tensile proper(MPA)after flooding and UVA irradiation | ≥0.45 | 1.05 | GB/T 13477 | |
Hardness (HsA) | 20-60 | 43 | GB/T 531 | |||||
Thermogravimetry (%) | ≤10 | 4.2 | GB/T 16776 | Tensile proper(MPA)at 23 Tensile strength in adhesion(%) | ≥100 | 187 | GB/T 13477 | |
Tensile proper(MPA)in standard condition | ≥0.60 | 0.99 | GB/T 13477 | GB/T 13477 | ||||
Storage | 9 months shelf life if stored below 27 in cool and dry place after production. |
Standard: GB16776 - 2005
Estimated amount of use: Please see following form of estimated amount of various joints:
The length of "High performance neutral silicone structure sealant " can be extrude during application.
Specification | Width(6mm) | Width(9mm) | Width | Width(15mm) | Width(18mm) | Width(21mm) | Width |
Thickness(6mm) | Length(8.3m) | Length(5.5m) | Length | Length(3.3m) | Length(2.8m) | Length(2.4m) | Length |
Thickness(9mm) | Length(3.7m) | Length | Length(2.2m) | Length(1.8m) | Length(1.6m) | Length | |
Thickness(12mm) | Length | Length(1.7m) | Length(1.4m) | Length(1.2m) | Length |
Note: The actual usage amount maybe different due to the joint design, installation position of pad material, repairing skill and wastage in application.
Attention: Information published in this instruction is correct. However, but no means can it be considered and absolute guarantee, as usage and application of the product in accordance with the instruction given and success in application is beyond our control and is depend on many factors. Customers should have a good knowledge of product and make independent judgments of optimal usage before application.