Heavy Metal Tungsten Alloy Plates / Bar Thickness 1.0mm to 150mm WNiCu WNiFe
| Place of Origin: | Guangdong |
|---|
Company Profile
| Location: | Wuhan, Hubei, China (Mainland) |
|---|---|
| Business Type: | Manufacturer |
| Main Products: | Tungsten Carbide Cutting Tools, Tungsten Carbide Wear Parts, Tungsten Products |
Product Detail
| Model No.: | AIA-1 |
|---|
Product Description
Heavy Metal Tungsten Alloy Plates / Bars Thickness 1.0mm to 150mm WNiCu WNiFe
Tungsten alloy plates have density ranges from 17.0g/cm3 to 18.8g/cm3. It has low thermal expansion coefficient, high strength and high modulus of elasticity.
Tungsten alloy has low thermal coefficient but high absorption ability and high-energy rays. Tungsten alloys are produced according to AMS-T-21014 standard.
Tungsten alloy plates are widely used as balancing molds and high temperature molds. Also it can be made into protective shields and high energy rays. Tungsten alloy plates play an important role in aircraft controlling surfaces, helicopter rotor systems, parts of engine and shipping ballast.
Description of Tungsten Alloy Plates:
Density: (16.8 - 18.8) g/cm3
Surface Condition: Machined, Ground
Standard: AMS-T-21014
Dimension: Thickness 1.0mm - 150mm, Width max 300mm, Length max 600mm
Composition: W content: 88-98%, W-Ni-Fe, W-Ni-Cu
Surface: Sinter state, finish state
Application: balance weight, Military industry
Tungsten Alloy Plates Applications:
Tungsten Alloy products are offered as machinable blanks or as precision machined parts to customer specification and used in many different applications as listed below.
Tungsten Alloy
Counterbalance for Vibration Dampening
Aircraft control surfaces
Helicopter rotor Systems
Engine components
Auto racing industry
Ship ballasts
Golf club weights
Down hole logging-Sinker bars
Boring bars
Ordnance application
Bucking Bars
Properties of Tungsten Alloys:
|
Alloy Type |
HD17 |
HD17D |
HD17.5 |
HD18 |
HD18D |
HD18.5 |
|
MIL-T-21014 |
Class 1 |
Class 1 |
Class 1 |
Class 3 |
Class 3 |
Class 4 |
|
SAE-AMS-T-21014 |
Class 1 |
Class 1 |
Class 2 |
Class 3 |
Class 3 |
Class 4 |
|
AMS 7725 C |
7725 C |
7725 C |
-- |
-- |
-- |
-- |
|
ASTM B777-87 |
Class 1 |
Class 1 |
Class 2 |
Class 3 |
Class 3 |
Class 4 |
|
Typical Density |
17.1 |
17.1 |
17.5 |
18 |
18 |
18.5 |
|
Typical Hardness RC |
24 |
25 |
26 |
27 |
27 |
28 |
|
Ultimate Tensile Strength Min |
110,000 |
120,000 |
114,000 |
110,000 |
120,000 |
123,000 |
|
Minimum % Elongation |
6 |
10 |
7 |
7 |
7 |
5 |
|
Proportional Elastic Limit |
45,000 |
52,000 |
46,000 |
45,000 |
44,000 |
45,000 |
|
Modulus of Elasticity |
40 x 106 |
45 x 106 |
47 x 106 |
45 x 106 |
50 x 106 |
53 x 106 |
|
Magnetic |
No |
Slightly |
Slightly |
No |
Slightly |
Slightly |
Picture show:
