Totem Real Time Vehicle GPS Tracking SD Card Temperature Monitor CE
| Place of Origin: | Guangdong |
|---|
Company Profile
| Location: | Shenzhen, Guangdong, China (Mainland) |
|---|---|
| Business Type: | Manufacturer |
| Main Products: | Car GPS Tracker, 3G GPS Tracker, AVL GPS Tracking |
Product Detail
| Model No.: | AIA-1 |
|---|
Product Description
Totem Real Time Vehicle GPS Tracking SD Card Temperature Monitor CE
Firmware Feature:
- FOTA – Firmware Over the Air
- Sleep entry/exit detection
- Heart beat function to keep TCP connection.
- Two way conversation: speaker/microphone
- GPS module fault detection
- 3 operating modes - Normal, Sleep, Deep Sleep
- Over speed detection with buzzer audible warning
- Mass update of Configuration settings via GPRS
- Changeable SMS alarm message for each port (digital input/output)
- Temperature monitoring within range Min/Max detection
- GEO fence function with circular/rectangular shape
- Ignition cut detection
- Internal battery level monitoring and low capacity detection
- GPS aerial cut detection
- External power cut detection
- Voice Listen-in for authorized ueser
1. SD slot help to store data, it is advanced version, can used for fleet management | | vehicles maintenance | safety | manpower utilization | Fuel/Oil management.
2. can get the reports: location, direction and speed, working hours report, ignition on/off report,idle report, fuel consumption report and so on in the tracking software platform.
3. AT09SD in a small dimension but can connect many accessories at the same time , 2 temperature sensors, fuel level sensor and RFID, IButton, camera and other accessories.
Specifications:
| Hardware spec | |
| MCU | STM32F103VCT6 (ARM 32-bit Cortex™-M3 CPU) |
| Frequency | Quad-band: 850/900/1800/1900Mhz |
| GPS | uBlox NEO 6M |
| GSM antenna | External |
| GPS antenna | External |
| Inner battery | 900mAh polymer battery |
| Movement Sensor | 3-Axis sensor |
| PIN IO Interface | 4 digital input |
| 4 digital output | |
| 4 analog input | |
| 1 Panic Button | |
|
2 1-wire for iButton and temperature probe |
|
| 8 PIN IO Interface | 1 RS232 |
| 1 Speaker | |
| 1 Microphone | |
| USB port | For upgrade firmware and |
| debug purpose | |
| (True USB port, not UART to USB) | |
|
SIM socket SD slot |
1 standard SIM socket, 1 SD card slot |
| Dimension |
93mm*82mm*30mm |
GPRS and SMS alarm event:
- shocking alarm by 3 axis sensor
- Digital input activate/disactivate
- idle speed alarm
- Digital output cut/resume
- low battery voltage
- Emergency button
- GEO fence in/out
- GPS antenna drop/connect
- External power source cut
Optional Accessory
- Camera: take picture and send to server
- door sensor: for the long truck without electronic in back door
- Relay: For cut off engine remotely
- fuel sensor: RS232/485 fuel sensor, accuracy is better.
- Buzzer or LED lamp: to give driver alart
- speaker/microphone: for two way conversation
- temperature sensor: detect temperature for some specical transport
- iButton or RFID: Driver ID/to identify the driver
Standard Package
- 1 x GPS tracker AT09SD device
- 1 x IO cable
- 1 x GSM antenna
- 1 x GPS antenna
Contact Info
- Skype: Frisance
- Mobile: +86 15815591051
- WhatsApp: +86 15815591051
- Email: frisance@totemtek.com
Welcome your customize requirement or OEM/ODM project !