PWcar HKpost free ship 433Mhz Remote Control Remote Code Scanner Detector 433Mhz Key Copier

PWcar HKpost free ship 433Mhz Remote Control Remote Code Scanner Detector 433Mhz Key Copier.

433Mhz Car key remote control is PWcar Wireless Remote Key/Code Scanner. 433Mhz Remote Control Code Scanner can Detect, receive, copy car remote control signals. Remote Control Code Scanner Detector key copier Working frequency range is 433Mhz  

433Mhz Remote Control Code Scanner Detector  key copier

433Mhz remote control code scanner(copier)

Working frequency range: 433Mhz

433Mhz Remote Control Code Scanner Detector key copier is only for fixed code remote key, not for rolling code remote key.

433Mhz Car key remote control Wireless Remote Key/Code Scanner Detect, receive, copy car remote control signals, then command the car as freely as the car's owner

433Mhz Remote Control Code Scanner receives the signal sent by the fixed code anti-theft system, save and copy the master's remote control signal The effective distance is 500 metres Save thirty remote control signals Decodability chip: PLC fake rolling code(5326), EV1527, PT2262, HT12E, HT6014

Operate Instruction

The machine uses a dedicated 9V power supply, switch on the left side, after booting, it will show English " Remote control Decode the tool ". The machine operates at a frequency of 305-433mhz. There are six keys--A, B, C, D, E, F. All feature set is completed by these six keys, the A-D key is the former group function, E, F keys are the latter function.

Notice: when install the batteries, ensure "+" to "+" and "-" to "-" to make it is possible to supply power for the machine

Specific operation instructions

A.Press any key to do setting after booting, in the general case each receives a signal, there will be two lines CAPION on the LCD panel, the first line before eight digital is the address of the received signal, after four is data bits, the second line is before three number is oscillation resistance, followed by four number is the chip type (received signal can be generated by remote control, infrared magnetic door)

1. when received signal, directly press A or B or C or D can change the received signal data and laun-ch out

2. when receiving the signal, press the F key, In a lower place of the LCD display show *, the machine keep the last time received signals, and refused to accept any other signal. We can change the signal data bits via A, B, C, D key and press E key to laun-ch out the modified encoding

B.Scan Function: when a set of normal use anti-theft host missing accessories, you can use the machine to scan for the coding, then made remote control and other accessories for it.

Specific operation as follows:

Press E key after booting, at the bottom right of the LCD display appears 1.2M*, means the testing vibration resistance value is 1.2M ohm, press the F key can change the oscillation resistance value, optional respectively is 1.8M, 2.2M, 3.3M, 4.7M. After confirmed the vibration resistance value, must provide the data bits, choose any key from A, B, C, D, press E to start scan. Normal band all the scan is complete need to 10 minutes, LCD screen first line before 8 numbers is changing to scan address bits, the second line the front changing information is scan times. When scanning to the encoding of the anti-theft host, the host will make a sound, scanning continues to forward, we press F key, the machine backward scan, also will slow down, when heard the host sound again, press the E key and hold for more than 2 minutes the let go, at this time, the appears address bits is the address code of the anti-theft host(Note: The base operating less skilled, address bits may also scan backward one or two more bits, you need to use "every three into one" method on the basis of the address code plus one or two, you can first scan to the address bits then record it by pen, and then every three into one on the basis of the record address bits, all = 010 010 + 1 = 011 12010122 + 1 = 12012200 And by this analogy, you can get the real address of the address bits encoding) to determine if the encoding is correct, use below "c"  function to self test encoding.

C.Optional encoding function: it is a test method used when not sure about the address bits.

Specific operation as follows:

Press E key after booting, it will appears the same interface with " B" scan function, press F to select the appropriate oscillation resistor value, and then press the E key again, on the right of the resistance value appears one "+" sign, at the top left appears eight address code flashing point, press one or two keys to increase or decrease the value. Press A or B to increase or reduce value, pree C or D to move left and right, press E again can laun-ch out.

D. Storage Function

1. In the boot state, each receiving a wireless signal, press the "E" key to store.

2. Press A and B at same time, when Lcd display appears " S " sign, press E can call up the stored coding sequence.

With the Progressive press "1" and "2" key to display "S" symbol, press the "5" key to successively call up the stored encoding, press "A" or "B" or "C" or "D" to laun-ch out the encoding.

3. Forwarding function: Press C and D at same time, when appears "1" sign can activate the forwarding function. Tthe display appears "/\" sign when receiving an unknown code, press the "F" key forwards, press the "E" key to exit. If known received encoded chip, it will not be forwarded.

Note: LCD display show *, the machine refuse to accept any other signal. When you press the F key, the * disappear and you can receive the signal again.
PWcar Payment Terms

1) PWcar Accept Payment Terms including Alipay, Paypal, West Union, Wire Transfer ( TT, Bank transfer ), MoneyGram. All major credit cards are accepted through secure payment processor ESCROW.
2) If you can't done the payment on aliexpress, pls contact us to change other payment terms, thanks.

PWcar Discount 

Every Customer have the opportunity to get discount, pls email us to get discount, thanks

PWcar Shipping Methods  (pls confirm with us your receiver's information to ensure you can get your parcel best and fastest, thanks)

1) PWcar will send the items to any address in any countries as per customers request.

2) Usually items are shipped within 1-3 working days once full payment is settled and confirmed address with customers. Sometimes have a little delay due to the weekend, holiday or some special reason, pls contact us to confirm.

3) Parcel shipping method and track links

Our shipping method contains: DHL, UPS, EMS, FedEx, HKpost, CNpost and other international express.

After you complete your order, you will get an email need you confirm receiver's information and customs value.

Once your parcels send out, we will tell you the tracking no., you can track your parcel status via below tracking link accordingly( delivery time will be different for different countries)

DHL/ARAMEX      3-7 working days        dhl.com/ARAMEX.com
    
UPS      3-7 working days        ups.com
    
FEDEX    3-7 working days       FEDEX.com
    
EMS      7-20 working days       ems.com.cn (China EMS)
    
CNpost/HKpost   7-30 working days      hongkongpost.com / 17track.net/IndexEn.html (less than 2KG)
    
Notice: Normally, most of the items on our store can be shipped to most countries in the world. However, different shipping methods may have different limitations on the delivery destination. For example, so far only EMS, CNpost is available for Russia, other shipping method likes DHL, UPS not reach Russia. In this case, our customer service will provide you some instruction.    

DHL Remote Area

PWcar Shipping fee not include remote surcharge, if your address is remote area, pls contact us.

Here is the link to check whether your address is remote area: raslist.dhl.com/jsp/first.jsp

Fill in your country, postal code or city name, click " OK " then can know it, both postal code and city are need check, either is remote your address is remote

PWcar Order Feedback

PWcar will try our best to make you 100% satisfied! We highly appreciated your positive feedback! And if you meet any problem about the item, pls feel free to contact us before give bad feedback, we will do all we can to help you solve all problems you meet, thanks in advance!