| FEATURES |
| ● Wide range: |
| - 0.1 ~ 60 mpa;The minimum range range: 0 ~ 5 kpa |
| Or 0 ~ 0.5 m or above level |
| ● Low zero, adjustable range |
| ● Low with reverse polarity protection and current limiting protection |
| ● Lightning protection, radio frequency interference resistance ability |
| ● Low wider practicability, easy installation |
| ● Low and high precision, high stability, high reliability |
| ● Low with explosion-proof properties |
| ● Low IP65, protection grade suitable for outdoor installation |
| ● Low power supply, output, two wire |
| ● Applicable to occasions with higher requirements, comply with the requirement of measurement standard |
| ● Low unique design makes the water hammer shock performance is good |
| ● Low service life is long |
| ● According to the special requirements, can make its good freezing resistance |
| ● Low HART protocol can be customized |
| application |
| ● The industrial field process pressure control |
| ● The aerospace field |
| ● The petroleum chemical industry |
| ● Light industry machinery, medical equipment |
| ● Marine shipbuilding industry |
| ● Water conservancy and hydropower plants, constant pressure water supply |
| ● The industrial field process pressure control |
| ● The aerospace field |
| ● The petroleum chemical industry |
| ● Light industry machinery, medical equipment |
| ● Marine shipbuilding industry |
| ● Water conservancy and hydropower plants, constant pressure water supply |
| ● Other automatic control and detection system |
| datasheet |
| ● Accuracy: 0.25%FS,0.5%FS |
| ● Measuring range: -1...0...600bar |
| ● Power supply: 24VDC(12 to 36 VDC) |
| ● Output: 4-20mA(0-5V,1-5V,0-10V,0-10mA) |
| ● Overload: 150%FS |
| ● Burst pressure: 300% |
| ● Protection: IP65 |
| ● Operating temp: -20 to +85 deg C |
| ● Sroring temp: -40 to +125 deg C |
| ● Process connection: G1/2(1/2BSP), 1/2NPT, G1/4,1/4NPT,3/8(customized) |
| ● Wetted parts: 304 stainless steel |
Datasheet: ● Accuracy: 0.25%FS,0.5%FS |
| ● Measuring range: -1...0...600bar |
| ● Power supply: 24VDC(12 to 36 VDC) |
| ● Output: 4-20mA(0-5V,1-5V,0-10V,0-10mA) |
| ● Overload: 150%FS |
| ● Burst pressure: 300% |
| ● Protection: IP65 |
| ● Operating temp: -20 to +85 deg C |
| ● Sroring temp: -40 to +125 deg C |
| ● Process connection: G1/2(1/2BSP), 1/2NPT, G1/4,1/4NPT,3/8(customized) |
| ● Wetted parts: 304 stainless steel |
.gif)
.jpg)