20 channels wireless remote control fireworks firing systems

Introductions:

Each machine has a self-test function of ignition. "Fire" works each time you connect the power lead before you open the self-test, if a connection indicator light flashes means that the ignition had been damaged an can not be used.

T-10 is a practical small size, a remote controlled electronic ignition of many fireworks products. Using 1 million of non-repetition of the more secure codec technology, which allows the set off of fireworks can be tens of meters to a few hundred meters from the set off of wireless remote control, no ignition officers at close range.

Usage Introduction

1 Put 4 pcs NO.7 battery into the battery box, and turn on the power, is green, it means the power is normal, press the button of the remote

, the light is flicking, it means receiving is normal

2.Turn off the power, connect the system with the igniter fireworks, make sure the remote can not be pressed, far away the safety distance, turn on the power of the receivers, is yellow, it means the connecting is normal.

• Far away the receiver more than 50M, use remote to fire.

• Set the control number by the remote (do not connect the product):Using a small stick to press the little hole, the green light will be flicking, the press the button of the remote, first relax the stick then relax the remote button, it succeed

Attention

1 Please do not place the product in the damp, sour, alkali and pollution environment so that the machine can not be damaged by the environment.

2 Pull out the talent of the receiver, make sure the distance is in normal range

3 Connecting fireworks is normal and the light of the testing is open, then use remote to fire.

4.If the machine can not work well or the distance is too near, please check the battery, if the remote can not use to fire, please set the control

number again.