Topkit Tower Crane 2*2*3m Split Type Mast Section For Heavy Construction Equipment

2*2*3m Split Type Mast Section QTZ160(6024) 10 ton Topkit Tower Crane

Split Mast Section (Flaky mast section) 

DIMENSION: 2000MM X 2000MM X 3000MM
MAIN CHORD: ANGLE STEEL 200 X 20MM OR 200 X 26MM
EQUIPPED WITH THE BOLTS
USED FOR ACLASS QTZ125, QTZ160, QTZ200, QTZ250 AND QTZ315 TOWER CRANES

Advantages of Split Mast Section

1. The surface of entire steel structure are pretreated with shot blast technique to remove the traces of rust, meanwhile increase the adhesion and durability of paint.

2. Panel design mast section possesses excellent strength, easy installation, economical maintenance along with convenient transport. It can save at least 60% of the transportation cost compared with monobloc mast structure.

3. The panels provided with ladder fixing gussets must be face to face.

4. The panels are assembled by 20 special fishplate bolts.In every case , the heads of the bolts are on the outside

5. The assembling of masts between each other is by means of 8 shafts connected 2*2 by 4 pins and equipped 

with a set of accesses as described.

Loading Containers of Split Mast Section

Welcome to visit us and we are ready to support you with ACLASS service.