user login

8M powder coating Electrical Power Pole for distribution and transmission line

Place of Origin: Jiangsu

Company Profile

Location: Wuxi, Jiangsu, China (Mainland)
Business Type: Manufacturer
Main Products: Electrical Power Pole, Galvanized Steel Pole, Mono Pole Tower

Product Detail

Model No.: Electric Power Pole

Product Description

8M powder coating Electrical Power Pole for distribution and transmission line

 

Flexibility, ease of installation, maintenance free, reliability . These are just some of the advantages provided by our galvanized steel monopoles over concrete or lattice structures. We design, manufacture and supply any tapered steel poles for Transmission networks.

 

Quick Description

 

Electrical Transmission and distribution pole

For Electrical transmission and distribution structures

Round or conical shape with height from 8m to 15m

With hot dip galvanize or painted finish

 

Technical Data Sheet(F=6.5KN)

 

Dimension 10m 11m 11.8m 13m 14m 16m 18m
DI(mm) 190 190 190 190 190 190 190
D2(mm) 400 400 410 430 450 470 510
T(mm) 3 3.5 3.5 3.75 3.75 4 4
h(m) 1.6 1.8 1.9 2.1 2.3 2.6 3

 

 

Connection Type

 

1. Joint Type

2. Flange Type

 

 

 

Standard Accessory

 

-Top plate

-Base plate

-Bottom strip

-Standard hole

-Climbing rung

-Anchor bolt

-Bitumen protection

-Painted marking

-Removable ladder

 

Available Foundation Types

 

Direct Embedment

Anchor Bolt/Base Plate

Vibratory Steel Caisson

 

Available Finishes

 

Galvanized per ASTM A123

Paint over galvanized,paint over black steel

Powder Coating

 

Standard Features of in-ground and base plate mounted

 

In-Ground Mounted:

 

12-sided pole shaft

Welded top cap

Mounting holes (to your specification if required)

Identification plate

M12 earth point 250mm above the nominal ground line

M24 nut 250mm above the nominal ground line (to assist lifting)

Additional in-ground corrosion protection 200mm above to 400mm below the nominal ground line

Anti-sink straps

Hot dip galvanised finish

 

Base Plate Mounted:

 

12-sided pole shaft (40kN to 80kN)

16-sided pole shaft (100kN & 120kN)

Welded top cap

Mounting holes (to your specification if required)

Identification plate

M12 earth point 250mm above the pole base

Two lifting gussets on the base plate

Anchor bolts, templates, nuts & washers

Hot dip galvanised finish

 

Product Gallery

 

The information to inquiry or purchase

 

-Steel pole height and force

-Cross arm type and length,the position to install in the steel pole

-The method to fix the cross arm(use bolt to connect or use one or two template to weld in the steel pole to install the cross arm)

-Safety factor of the steel pole

-Wind speed

-Type of climbing rung

-Destination port

-Other.

 

Design

 

 

Company Introduction:

 

Jiangsu Milky Way Steel Poles which established on 1991 is located in Wuxi,East of China ,near one of the largest sea port of China ,Shanghai,Port .

Our Company has 24 years experience on producing the steel poles including the transmission power pole,street light pole,high mast pole and so on.

We exported to oversea countries since 1991 and our products have been delivered to more than 70 countries and areas ,including America,Australia ,Russia ,Germany ,Span,Philippines ,Malaysia,Africa and so on.

 

Post Buying Request