Hydraulic scrap metal baler

1. Application of metal baler:
   Y81 series of hydraulic metal baler are mainly used in recycling companies, steel plants, ferrous & non-ferrous smelting industry to press the metal scraps into acceptable fumace charges or shapes(cuboid, cylinder or octagon), convenient for storing, and can reduce the cost of transportation and smelting, increase speed of fumace charging.

2.  Features of metal baler:
   1) Hydraulic drive , manual control or PLC control.
   2) No footing bolts needed in installation.
   3)Diesel engine can be equipped or generator for power.
   3) Baling force 10 grades from 100 to 630 tons.
   3) Productivity from 12 to 150 tons per shift (8 hours).
   4)High effeciency, and less power comsumption.
   5) Bale-discharging: turn-out or push-out .
   6) The chamber box size and bale size can be customized.
   7)The two sides of knives on the chamber box if customer request.

3. Parameters of metal baler:

   a.Nominal force: 4000 KN

        b.Work pressure of baler: 21 Mpa        

        c.Bale density: ≥2 t/m³                                     

         d.Motor : 45 KW*2 sets                                       

         e.Single cycle time: around 200 s                                      

         f.The chamber size: 3000*2000*1200 mm

         g. The bale size: 700*700 mm   

         h.  Discharging: Side turn-out  

         i.The chamber box size and bale size can be customized

         j. Control : Manual/Automatic       

         k.Productivity of baler : 40-52 tons/shift (8 hours standard)