Full Automatic Door Frame Roll Forming Machine With Online Punching Lock Holes
| Place of Origin: | Zhejiang |
|---|
Company Profile
| Location: | Wuxi, Jiangsu, China (Mainland) |
|---|---|
| Business Type: | Manufacturer |
| Main Products: | Steel Roll Forming Machine |
Product Detail
| Model No.: | DF |
|---|
Product Description
Full Automatic Door Frame Roll Forming Machine With Online Punching Lock Holes
Specification:
| 3in1 machine | Coil ID: | 508mm |
| Coil OD: | 1200mm | |
| Coil weight: | 2tons | |
| Voltage: | 380V AC 50HZ | |
| Maximum Speed: | 16m/min | |
| Feeding precision: | ±0.1mm | |
| Straighten Roll: | Upper5/Lower4 | |
| Feeding Roll: | upper 1/lower 1 | |
| Expansion type: | Hydraulic | |
| Punching Machine | Design Technology: | From Australia JD Machinery |
| Structure: | 4 Columns | |
| Mold Material: | Cr12Mov | |
| Mold Treatment: | Heat treatment, HRC58~62o. | |
| Cylinder: | Indivicual Seperately Move Function | |
| Control System: | PLC control |
Production line components:
| 1. |
3in1 Machine [De-coiler+Leveling+Servo Feeder] |
1 set |
| 2. | Hydraulic Punching Machine | 1 set |
| 3. | Roll Forming Machine | 1 set |
| 4. | Back Punching Machine [for lock hole] | 1 set |
| 5. | Automatic Convey Belt | 1 set |
| 6. | Hydraulic Station | 2 sets |
| 7. | Computer Control Box | 2 sets |
| 8. | Product Stand Tables | 2 sets |
| 9. | Punching Molds | 5 units |
| 10. | Tool Box | 1 box |
Machine Information:
This machine use to produce metal door frame, from a coil to finished door frame product only finished by one production line, the machine line has 3in1 equipment which has de-coiler for coil hold, leveling machine for making coil sheet flat, and then use servo feeder to feed sheet length to punching machine as PLC program setting, hydraulic punching machine has several individual cyliner which could be seperately controlled by PLC, so it's easy to achieve punching any hole or slot or notching at any length side of sheet. After finish holes punching on sheet, then do length cut-off, and then use automatic convey belt to transfer the sheet to roll forming machine. Roll forming machine will forming the door frame profile as the drawing requirement step by step. After profile forming there has straightening device for adjusting the straightness of finished door frame. And then product comes out of roll forming machine to stand tables ready for packing.
It is full automatic machine line and quite easy to use it, only require 3 people for operation.
Product Information:
| Tolerance | Profile Section: | ±0.5mm |
| Cutting Length: | ±1.0mm | |
| Hole Distance | ±0.1mm | |
| Straightness: | 1.0mm/M | |
| Twist: | 1.0mm/M | |
| Bend: | 1.0mm/M | |
| Material Info | Type: | Cold Roll Steel Galvanized Steel |
| Thickness: | 0.8mm~1.2mm | |
| Yield Strength | 195Mpa | |
|
Maximum Width
|
<350mm |
Packaging & Delivery:
| Packaging Details: | 1. Tighten to container with steel wire rope and welded machine with container by angel iron 2. Main forming machine and un-coiler is naked(If you need we can also packed with water-proof plastic) 3. PLC contral system and motor pump are packed in wooden box with water proof paper coverage |
| Delivery Detail: | Within 30 working day after we get 30% deposit |
