Rotary screen fabric dye machine for knitted or woven fabric dryer

Rotary screen fabric dye machine  for knitted or woven fabric dryer

KD-R456 type rotary screen dryer

Application

This machine has overfeeding device, suitable for drying knitted fabric and woven fabric.

Working principle

Rotary (part 1) is punching cylinder, half of the rotary screen is blocked by seal plate (part 2). Two neighboring rotary screens counter rotate, seal plate is fixed. The air, after heated in heater (part 4) by centrifugal fan (part 3), through guide plate(part 5) into grey fabric layer(part 6) for circulation, guide plate(part 5) uniformly distributes hot air along the grey fabric width direction. Grey fabric delivered to first rotary screen through transport lattice (part 7), immediately absorbed by air on lower surface of the rotary screen, the grey fabric on the joint of two rotary screens shifted to surface of second rotary screen. The dryed grey fabric through delivered to outside of the machine. The fabric dryed uniformly, because it’s both side alternately dryed.

The principle of air circulation in the rotary screen dryer is counter-current operation of exhaust gas circulation. Fresh air indrafted from rear rotary screen and mixed with circulation air. After heating, cycle use, parts of imbibed air enter into prior rotary screen, continuous heating, then absorb water, the humidity of air gradually increase, humid discharged to outer machine by the action of centrifugal force, wet grey fabric meet with most humid hot air, then the moisture regain of grey fabric gradually go down, temperature escalates and meets fresh air with lower temperature in the exit of rotary screen, grey fabric’s temperature drops.

 Product specifications

1.  According to customer’s request, machine can be left hand or right hand machine, designed speed is 5-60m/min. Max working width is 1800-2200mm.
2.  Dia. Of rotary screen is 1400mm, stainless steel plate with 2mm thickness, punching 2mm.
3.  Fan: centrifugal fans, with diameter 1200mm, 730 rpm.
4. Heater: multi tube tension wrapped seamless steel tube with diameter 25*2, covered with aluminium tape, thickness 0.4mm, steam heating or oil heating type.
5. Netcom driving motor, drive motor,reduction box (Changzhou Jiangsu, China) 4kw-4P-7:1, 1 set, fan motor: 3 pcs, 4P-11kw,3pcs,4P-7.5kw(feeding and outlet are in two transmission)
6. Heat preservation seal plate in the outside of machine is 50 mm thick.
7. Shape size(working width 1800mm), big rotary screen LWH: 12*4*2.9m.
8. Electrical equipment: electrical apparatus element(CHINT Zhejiang) + 1 set of 3.7kw frequency converter + 3 sets of 18.5kw frequency converter.