Metal Fluorocarbon Wall Insulation Board for External Decorative Ultraviolet-Resistance

Product

Performance

Metal Fluorocarbon Painting Decorative Insulation

Board

Decoration

Layer

Metal Fluorocarbon paint decorative board

High hardness, impact resistance, anti-buckling, wear resistance, anti-corrosion ,acid, salt. free Maintenance,self-cleaning no dust sticked, strong adhesion,weather resistance

 No chalking & fading, over 25 years long service life . with the  excellent insulation performance, low thermal conductivity and stability,no affected by temperature and humidity changes,and with the anti-water , permeability and other characteristics, to keep the whole building to achieve the constant temperature and humidity, constant oxygen.

Insulation Layer

EPS insulation layer

(Grade B1)

Heat conductivity ≤0.041.  volume-weight :18kg / m³ with the tensile strength:110--120kpa; volume-weight 20kg / m³ with the tensile strength :140kpa.

XPS insulation Layer

(Grade B1)

Heat conductivity ≤0.030. Volume-weight 25--45kg / m³ & tensile ≥150kpa. Strong compressive resistance.   30-40 years average using life. Excenllent structure load-bearing performance .

Polyurethane insulation board

(Grade B1)

Hard polyurethane with low thermal conductivity, good thermal performance. When the hard polyurethane with the  density of  35 ~ 40kg / m3, thermal conductivity is only 0.018 ~ 0.024w / (m.k), equivalent to  half of the EPS, is the lowest heat conductivity of all the insulation materials .

TPS insulation board

(Grade B1)

Heat insulation thermal conductivity is 0.060W / (m · k) ,it has good tensile compressive strength , impact resistance and stability ; its compressive strength reaches 150-500KPa

Rock wool  (Grade A)

Appearance quality: smooth surface, without prejudice practical scars, stains damaged. Combustion performance: non-combustible. Thermal load contraction temperature: 643 degrees.
Moisture absorption: 3.9%. Organic content: 2.9%.
Rockwool board basic parameters:
Material: rockwool
Apparent density: Rockwool 120 (kg / m3)
Heat conductivity: 0.04 (W / (m.K))
Max operating temperature: 80 ()
Specifications: 950,1150 (mm )
Operation standard: GB
Operating temperature: 80 ()

Phenolic Foam Board(Grade B Grade A)

Not be melt at high temperatures ,not be softened, with low smoke, non-proliferation flame resistance, flame penetration, There is  no distortion, no burning ,no fire, being placed 10 minutes at 1400 , can effectively prevent the flames and smoke spread

Item

Detection standard and requirements

The third party test 
results

 
Weather resistance

JF149-2003,
JGG144-2004

After weather resistance test,
No damage such as facing layer 
blistering or falling off,Protective
 layer hollowing or falling off; No 
seepage crack appear.

No damage such as 
facing layer blistering
or falling off,Protective
 layer hollowing or 
falling off; No seepage 
crack 

JG149-2003,
JGJ144-2004

Impact-resistance strength 
grade:10

Water absorption 
g/,Immersed 
24H

JG149-2003,
JGJ144-2004

≤500

21

Wind pressure
 resistance value   
KPa

JG149-2003,
JGJ144-2004

Not less than the wind load 
design value of the project

After 15 kpa level wind 
load esistance test,,no 
water seepage

Freezing and 
thawing resistance

JG149-2003,
JGJ144-2004

No surface cracking,hollowing,
blistering,exfoliation

No surface cracking,
hollowing,blistering,
exfoliation

Steam flow density g/(·H)

JG149-2003,
JGJ144-2004

≥0.85

2.36

Watertightness

JG149-2003,
JGJ144-2004

Sample protective layer inside 
without water infiltration

Sample protective layer 
insidewithout water 
infiltration

Thermal conductivity W/(m·k)

GB/T10801.1-2002,
JG149-2003

≤0.041

0.033

Apparent density 
kg/m³

GB/T10801.1-2002,
JG149-2003

18.0-22.0

19

The compressive 
strength perpendicular
 to the panel  MPa

GB/T10801.1-2002,
JG149-2003

≥0.10

0.10

Dimensional 
stability  %

GB/T10801.1-2002,
JG149-2003

≤0.30

Length Change 0.13

Width Change 0.15

Thickness Change 0.24

Compression&nbs