Min. Order: | 10 Piece/Pieces |
---|---|
Trade Term: | FOB,CFR,CIF,DAT,FAS,DDP,DAP,CIP,CPT,FCA,EXW |
Payment Terms: | Paypal, L/C, D/P, D/A, T/T, WU, Money Gram |
Supply Ability: | 1000 square meter/day (100tons/day) |
Place of Origin: | Hebei |
Location: | Hengshui, Hebei, China (Mainland) |
---|---|
Business Type: | Manufacturer, Trading Company |
Main Products: | Steel Grating, Wire, Wire Mesh |
Model No.: | YC-SG08 |
---|---|
Means of Transport: | Ocean, Air, Land |
Production Capacity: | 1000 square meter/day (100tons/day) |
Packing: | pallet |
Delivery Date: | 10-20 days after confirmed |
Steel ladder
1. Brand Name: YC-SG08
2. Material&Surface Treatment: Carbon Steel Q235 or Stainless Steel &HDG or Polish
3. Min. Order Quantity: 10 pieces (500kgs)
4. Supply Ability: 1000 square meter/day (100tons/day)
5. Price Range: USD 12-90/ square meter (700-950/ ton)
6. Payment Terms: L/C, D/A, D/P, T/T, Western Union, MoneyGram, Paypal
7. Delivery Detail:
Within 10-20 days once we receive the confirmed order
8. Description:
Steel ladder is made of steel grating which is load flat steel bar and cross bars, placed horizontally and vertically, and at an equal pitch apart, by welding with 200-ton hydraulic resistance automatic welding equipment, then cutting, punching and banding ends.
9. Characteristics of the Products:
Steel ladder produced according to National standards, after hot-dip-galvanized finish, the fence, stair treads and ladder become more beautiful and strong, and they are easy to install and maintain.
10. Specification:
(1) Quality Standard
Standard for steel grid | Standard for steel material | Standard for hot dipped galvanization | |
China | YB/T4001.1-2007 | GB700-88 | GB/T13912-2002 |
USA | ANSI/NAAMM(MBG531-88) | ASTM(A36) | ASTM(A123) |
UK | BS4592-1-1996 | BS4360(43A) | BS729 |
Australia | AS1657-1992 | AS3679 | AS1650 |
(2)Product specification
Bearing bar Pitch | Cross bar Pitch | steel grating load bearing bar specification width x thickness (mm) | |||||
20×3 | 25×3 | 32×3 | 40×3 | 20×5 | 25×5 | ||
30 | 100 | G203/30/100 | G253/30/100 | G323/30/100 | G403/30/100 | G205/30/100 | G255/30/100 |
50 | G203/30/50 | G253/30/50 | G323/30/50 | G403/30/50 | G205/30/50 | G255/30/50 | |
40 | 100 | G203/40/100 | G253/40/100 | G323/40/100 | G403/40/100 | G205/40/100 | G255/40/100 |
50 | G203/40/50 | G253/40/50 | G323/40/50 | G403/40/50 | G205/40/50 | G255/40/50 | |
60 | 50 | G253/60/50 | G253/60/50 | G403/60/50 | G205/60/50 | G255/60/50 | |
Bearing bar Pitch | Cross bar Pitch | steel grating load bearing bar specification width x thickness (mm) | |||||
32×5 | 40×5 | 45×5 | 50×5 | 55×5 | 60×5 | ||
30 | 100 | G325/30/100 | G405/30/100 | G455/30/100 | G505/30/100 | G555/30/100 | G605/30/100 |
50 | G325/30/50 | G405/30/50 | G455/30/50 | G505/30/50 | G555/30/50 | G605/30/50 | |
40 | 100 | G325/40/100 | G405/40/100 | G455/40/100 | G505/40/100 | G555/40/100 | G605/40/100 |
50 | G325/40/50 | G405/40/50 | G455/40/50 | G505/40/50 | G555/40/50 | G605/40/50 | |
60 | 50 | G325/60/50 | G405/60/50 | G455/60/50 | G505/60/50 | G555/60/50 | G605/60/50 |
(3)Type
A. Vertical Ladders
Vertical ladders are used for platforms which is with limited access and places where other structures are not allowed by the situation. Beams are made of angle bars(≥50×50×5)or flat bars(60×8) and rungs of round bars(≥φ20mm) with the optimum width of 500mm and other width of 600mm and 700mm, with the ladder height is within 5m, the width could be de-sized but shall be over 300mm. Guarding cages are required when the ladder height is over 3m with the distance between the bottom and the datum place of 2000-2400mm and the top which id higher than the datum plane sharing the same height with the fences satisfying Chinese Standard GB4053.3. Resting platforms with guarding fences for climbers could have enough rest are required when the height is over than 9m. Thus the ladder would be safe and steady and enjoy its appearance.
B. Inclined Ladders
Inclined ladder are classified into three categories: A with the height less than 2500mm,B 2500-5000mm and the height less than 5000mm, if over 5000mm, we must need "c", the rest platforms are required. While decide the ladder width, the angle of the inclined ladders should be considered, and usually the optimum is 700mm with alterations such as 600,800,900,1000,1100mm etc.
C. Reference Beams in accordance with Angles:
θ Type |
30°-39° |
40°-49° |
50°-59° |
60°-69° |
70°-79° |
Type A | Flat bar180×8 | Flat bar160×8 | Flat bar160×8 | Flat bar140×8 | Flat bar140×8 |
Type B | Channel bar[18a | Channel bar[16a | Channel bar[16a | Channel bar[14a | Channel bar[14a |
Type C | Channel bar[18a | Channel bar[16a | Channel bar[16a | Channel bar[14a | Channel bar[14a |
Note:
1. The preferred beam is[1Ba.
2. Beams can be adjusted as per customer's needs.
3. Beams can be designed as per customers' requirements and the site situation.
D. Table:Tread height=R, tread width=l30 l 40.
θ | 30° | 35° | 40° | 45° | 50° | 55° | 60° | 65° | 70° | 75° |
R | 160 | 175 | 185 | 200 | 210 | 225 | 235 | 245 | 255 | 265 |
L30 | 305 | 275 | 245 | 215 | 185 | 185 | 155 | 125 | 125 | 95 |
L40 | 285 | 245 | 245 | 205 | 205 | 165 | 165 | 125 | 125 | 85 |
275 | 275 | 235 | 195 | 195 | 155 | 155 | 115 | 115 | 75 |
Inclined ladders' angles are usually between 40°-59°and the preferred is 45°.
L30 means pitch of tread bearing bars are 30mm, L40 means 40mm (whereas with the regular font id good to T1, T2 treads and the Italic to T3 and T4 treads). The width can be changed as per customers' needs.
11. Manufacturing Process:
Steel grating have been fabricated strictly in accordance to the product quality standards, and their high quality is guaranteed under the control of ISO9001 quality system.
12. Application:
Mainly used for industrial platform, staircase pedal, banister, channel service, railway, bridge, the tower platform, high above the floor drain cover, road barrier, schools, factories, enterprises and institutions, the stadium fence, also can use the residence outside the window, balcony guardrail, highway, rail barrier, etc.