Casting Steel WCB Thermostatic Steam Trap For Heating System
| Place of Origin: | Gansu |
|---|
Company Profile
| Location: | Shenzhen, Guangdong, China (Mainland) |
|---|---|
| Business Type: | Manufacturer |
| Main Products: | Digital Heating Thermostat, Fan Coil Thermostat, Heat Pump Thermostat |
Product Detail
| Model No.: | TB-ge |
|---|
Product Description
Casting Steel WCB Thermostatic Steam Trap For Heating System
Quick Details:
Model:TB-ge
Size: 1/2" - 2"
Body Material: WCB
Connection: Flange & Screw & Socket Welded
Certificates: ISO9001 & API
Water Seal, Low Steam Leak
Tight Shut-off & Longer Life
Three Groups of adjustable Mechanisms
Adjustable Discharge Temp.
Water Seal, Low Steam Leak
Design Pressure: PN25
Pressure: 0.01 - 1.6 Mpa
Material: Casting Steel WCB
Temperature: 425
Working Media: Steam, Condensate, Water
End Connection: Flange, Screw & Socket Welded
weight: 10.4-18.8kg
Thermostatic Steam Trap / Bimetallic Steam Trap / Balanced Pressure Steam Trap
TB-ge :
- 1. Tight shut-off and long service life by using SCCV system.
- 2. Employing three groups of adjustable mechanisms, compact structure and large capacity.
- 3. The discharging temperature of the steam trap can be adjusted in operation to utilize the sensible heat of high-temperature condensate.
- 4. Hot condensate exists just before the trap, forming a tight water Seal, which ensures no steam loss.
- 5. Withstands water hammer with outstanding performance of air venting.
- 6. Operating without noise, benefiting for environmental protection.
- 7. Full open at the beginning of steam supplying, discharging cold condensate and air rapidly, which ensures quick start-up.
- 8. Stainless steel internals are resistant to corrosion and cavitation. Small in size and light in weight, easy maintenance.
- 9. Efficient in energy saving. Can be installed in any directions.
Application:
This thermostatic steam trap is suitable for steam main pipe, steam tracer, radiator, low temperature heating trough, jacketed kettle and heating system etc...
Note:
This balanced pressure steam trap Insulation is not recommended for pipe section 1 meter before the trap and the trap itself. Customers should provide the operating pressure on the site to set start-up temperature or else the steam trap will be adjusted at 0.5Mpa pressure and 90 Centigrade temperature.
