Emergency Ventilator TH-1a
This unit is one small and simple gas driven electronically controlled Ventilator, with micro-processor inside, and could be used for Emergency and Transport.
With functions of Alarm, Monitoring, Waveform;
With Pressure mode, Volume mode, etc.
Power Supply: Power Adaptor or Car Power or Battery.
Respiratory Modes: |
IPPV | SIPPV |
SIMV | SPONT |
Manual |
|
|
Technical Parameters: |
Tidal Volume: | 0~2000ml |
Inspiration Flow Rate: | 0~120L/min. |
Breathing Frequency: | 2~80bpm |
Oxygen Concentration: | adjustable 45%~100% |
Inspiration Time: | 0.2~5.0s |
Trigger Pressure: | -2.0 ~+2.0kPa |
Inspiration Pressure Limit: | 0.5 ~5.0kPa |
Minute Ventilation: | ≥18L/min. |
Assisted / Controlled Respiratory Switch Time: | 8s |
Patient End Pressure Limit: | <12.5kPa |
Gas Supply Pressure: | 0.28mPa~0.6 mPa |
Battery: | 4 hours |
|
Alarm Parameters: |
Tidal Volume | Airway Pressure |
Oxygen Concentration | Breathing Frequency |
Ventilation Stop | Oxygen Supply Failure |
Apnea Time | Battery Low Volume |
|
Monitoring Parameters: |
Airway Pressure | Tidal Volume |
Minute Ventilation | Oxygen Concentration |
Inspiration Indicator | Expiration Indicator |
Trigger Status | AC Power |
Battery Charging Status | Battery Volume |
Respiratory Modes |
|
The factory is located in Shandong Province, since 1999, professional for manufacturing and exporting ICU Ventilator, Home Ventilator, Emergency Ventilator, Air Compressor, Humidifier etc.