Creative 4.5 x 4.5cm ice ball cube trays ice ball maker mold made of FDA LFGB approved silicone

Creative 4.5 x 4.5cm ice ball cube trays ice ball maker mold made of FDA LFGB approved silicone

Features:  

• Comes with 1 ice ball tray - makes 4 Ice Balls each use

• Each mold makes an ice ball approximately 2 inches (4.5 cm) in diameter

• Easy to fill and easy to release

• Ice Spheres melt slower than regular ice resulting in keeping your drink colder and less water diluting your drink

• Get Creative - Ice balls can be flavored, colored, or even filled with fresh fruit or mint leaves!

• BRAND NEW - never used

• Completely washable and reusable

• Covered by 1 Year Warranty

• Size: 4.5cm diameter ice ball, 4pcs
  







How to Use Your Ice Ball Molds - INSTRUCTIONS (please read) and FAQs 


• Before using your new tray, be sure to wash thoroughly with soap and water

• Fill the bottom tray nearly full of water (leave about 1 cm unfilled)

• Then set the bottom tray on an even surface in your sink and press the lid tray down into the bottom tray until it is sealed (Note: The excess water will escape through the 4 vent holes at the top of each ball)

• When full, gently press down on the top of each mold to force out enough water to give a slight air gap at the top of each ball for expansion - This step is important so your ice balls will form properly without cracking - Need to leave room for expansion

• Do not worry about excess water in tray.  Let it freeze with the mold

• Lay flat in freezer for 5+ hours

• After freezing please follow these steps:

• Before removing mold lid, break all ice around balls using a twisting motion...with lid still on

• If you do not, there will be Saturn-like rings around each ball

• You do not have to be gentle with the silicone, it will not break

• After using this step to break ice, remove top lid and release ice spheres from bottom tray

• Note:  There may be a lot of broken ice, but the balls should be fine

• Ice balls are now ready for removal! Use ice balls you need and store the rest in a plastic zip bag in your freezer

• FAQ:  How to get clear ice?  Many people ask about this.  There is no magic solution to get perfectly clear ice every time, but there are some steps you can take to make your ice less hazy.  1. Use distilled/filtered water, rather than tap water.  2. Try boiling the water first, then letting it cool down.  Some of the haziness often seen in the ice ball comes from microscopic bubbles trapped in the water.  Boiling can help cause those microscopic bubbles to dissipate resulting in clearer ice once frozen.