user login

Ukuran Box Speaker 12 Inch Line Array Outdoor Instrument With Neodymium Woofers

Place of Origin: Zhejiang

Company Profile

Location: Guangzhou, Guangdong, China (Mainland)
Business Type: Manufacturer
Main Products: Line Array Speakers, Active Line Array System, Column Array Speakers

Product Detail

Model No.: W-8

Product Description

Ukuran Box Speaker 12 Inch Line Array Outdoor Instrument With Neodymium Woofers 

 

 

DESCRIPTION and APPLICATION


The W-8 is a line array system which is made of two 12” neodymium woofers, four 6.5” midrange speaker units, two 3”  titanium neodymium compression drivers and high-performance low-distortion compression driver with innovative horn design of waves phase philosophy. It is a zero interfere line array with multi-speaker combined to produce accurate directivity and maximum dynamic impact. Its midrange speaker units are beset in treble horn board and two waves guide plates are set in between to eliminate its interfere.Each enclosure is equipped  with rigging system, allowing flown array to be constructed rapidly and safely. W-8 is a 3-way, full range system and may be used without subwoofers for many applications. Also it may be complemented by ground stacked subwoofer CVR T-182/CV-218B , which brings superb line array performance to large stadiums, big outdoor concerts, commercial events,jbl similar line array  etc.

 

Model

W-8

Type Line array system
Frequency Response

52Hz-20KHz±3dB

Power handling LF 2×600W(RMS)2×1200W(PEAK)
MF 600W(RMS)1200W(PEAK)
HF 200W(RMS)400W(PEAK)
Sensitivity LF 104dB(1W-1M)
MF 107dB(1W-1M)
HF 111dB(1W-1M)
Max-S.P.L LF 135dB(PEAK/1M)
MF 135dB(PEAK/1M)
HF 134dB(PEAK/1M)
LF section 2×12" (310mm)neodymium woofer
75mm(3in) coil
Nominal impedance 8 ohm
MF section 4×6.5" (170mm)neodymium MF
50mm(2in)coil
Nominal impedance 8 ohm
HF section 2×3"neodymium compression driver
with 75mm titanium diaphragm
Nominal impedance 16 ohm
Output section 3-channel
Dispersion pattern 110°H×7.5°V
Finish Water-proof,wear-resistant textured black paint
Array design Arrays of less than 3×W-8 will
provide poor dispersion control and
are neither recommended nor supported
Speaker cables LF 1(+)1(-) 2(+)2(-) MF 3(+)3(-) HF 4(+)4(-)
Rigging system Please refer to the W-8 user
manual before any operation
Input connectors 2×Neutrik NL8
Recommend crossover LF 60Hz-600Hz
Post Buying Request