Orange / Green Rebar Forging Machine with CE Certificate for 16mm - 40mm Rebars

rebar forging machine with CE certificate for rebars from 16-40mm with orange and green color
 
Specifications:
 
The parameter for standard couplers:
 

 
 
The parameter for machine:
 

 
 
Description:
 
Rebar forging machine with CE certificate is a parallel-threaded mechanical splicing system designed for the connection of concrete reinforcing bars from Ø 12

 to 40 mm. 
Designed and manufactured in compliance with ACI 318, IBC 2006, BS 8110, Eurocode 2, DIN 1045. 
Machine:
A. Standard machine
B. Automatic machine
steps process 
 
 
Applications:
1. Jiangsu Runyang Bridge in China
 
2. Jeddah Water Pump station in Saudi Arabia
 

1. Cutting
The end of the reinforcing bar is sawn square.
2. Cold forging
The sawn end of the reinforcing bar is then enlarged by a patented cold forging process. The core

diameter of the bar is increased to a pre-determined diameter.
3. Threading
Finally, the thread is mechanically cut onto the enlarged end of the bar.
Splicing methods
Standard splice  
Easy connection by bar rotation until full thread engagement. Parallel thread : No risk of thread mis-match.

No risk of cross-threading.   
Position splice
Even when both bars cannot be turned, this system uses a standard coupler: The coupler is fully engaged

 onto the extended thread of the connecting bar. The assembly is simply completed by butting the bars

end to end and screwing back the coupler onto the first bar until full engagement. lock-nut to maintain the

second bar in position.  
Bridging splice
When the bars cannot be brought butt to butt (as it may happen in cages manufacturing), Bridging splices

are the answer. Both bars are threaded with a standard thread, and a “Bridging Assembly Set” is used to

connect  them.  
Transition splice
When there is a need to splice bars of different sizes, it is allowable in most cases to reduce the size of the

larger bar and to use a standard coupler. However we also proposes special transition couplers that

conveniently avoid the difficult task of planning in advance the need of transitions.
End anchors
A convenient alternative to hooked bars to provide end anchorages in congested areas. Standard

anchorage heads are circular and have a net bearing area of 4 times or 9 times the cross-section of the bar, but can also be made to order in other shapes or dimensions to fit the application

requirement.
Weldable couplers
For composite construction where concrete reinforcement bars must be welded to structural steel,

use weldable couplers, which are specially made from low carbon steel and which have a large chamfer for bevel welding.

Competitive Advantage:

• No reduction of the bar cross section area.
• Full-Tension splice: Bar-break under tensile load.
• Allows full ductile elongation of bars.
• Easy installation, no torque wrench required.
• One standard coupler for splicing requirements(Standard/Position)
• Manufactured under strict quality assurance plan ISO 9001, Third party tested.
• Full traceability of material origin and production batch.
• Coupler suitable for seismic areas.
• Tested under reverse-cyclic conditions.
• Solves bar congestion problems.
• No staggering of splices bars required.