ZDY Bevel Wheel Circular Gear Cylindrical Gear Reducer With Hard Tooth Face

ZDY Bevel Wheel, Circular Gear Cylindrical Gear Reducer with Hard Tooth Face

Specifications

Type, specification of speed reducer and its expressed method 

A. The type has ZDY single-stage cylindrical gear speed reducer, ZLY double-stage cylindrical gear speed reducer, ZSY three-stage cylindrical gear speed reducer 

B. Specification: Single stage: 80, 100, 125, 160, 200, 250, 280, 315, 355, 400, 450, 500, 560; 
Two tage: 112, 125, 140, 160, 180, 200, 224, 250, 280, 315, 355, 400, 450, 500, 560, 630, 710; 
Three-level: 160, 180, 200, 224, 250, 280, 315, 355, 400, 450, 500, 560, 630, 710; 

Product Description

1. Characteristics

A. The gear is made of high strength low carbon alloy steel through carburization and quenching. The hardness of tooth surface may reach to HRC58-62. All gear adapts NC tooth grinding process, high in accuracy and good in contact performance; 

B. High in transmission efficiency: Single stage, more than 96.5%; Double-stage, more than 93%; Three-stage, more 90%; 

C. Smooth and stable in run, low noise; 

D. Compact, light, long life, high bearing capacity; 

E. Easy to disassemble, inspect and assemble. 

2. Brief Product Introduction

This product is an outer meshed involute helical tooth cylindrical gear speed reducer. 
It is widely applied to the fields of metallurgy, mines, hoisting, transportation, cement, architecture, chemical, textile, printing and dyeing, pharmaceutical, etc. 
The suitable scope of speed reducer is as follows: 

A. The rotation of high speed shaft should not be more than 1500rpm; 

B. The circumferential velocity of gear transmission should not be more than 20, /sec; 

C. The temperature of work environment should be -40-45 egree celsius. If below 0 degree celsius, before start, the lubricating oil should be pre-heated to above 0 gree celsius. This speed reducer can be run at clockwise and counterclockwise direction.
 
3. Company Profile & Workshop Corner Show

Changzhou Mingdi Machinery Co., Ltd is a professional transmission machinery manufacturer of
 producing various gears, gear transmission and reducers, the hardened-tooth-surface cylindrical gearbox that is our featured product is widely used in four fields, among which
 are electrical machinery, plastic extrusion machinery, railway engineering machinery and metallurgical 
machinery industry.

Application Scope

Max speed for input shaft of gearbox is ≤1500rpm.

peripheral speed for the gear is less than 20m/s;

Working temperature is -40~+45 degree, when it's less than 0 degree, the lubrication oil should be heated before operation.

Applicable for the industries such as metallurgy, mine, chemical industry, construction materials, hoisting, 
transportation, textile, paper marking, food, plastic, rubber, engineering machinery, and energy industry.

Our Competitive Advantages
 
1. We ensure we will make immediate response on your enquires and any queries in 12 hours

2. Ability to produce customerized products as request.

3. Complete processing & testing equipment.
     

4. Quality is our culture; quality is the soul of enterprise.

5. Competitive price: we can give you an edge over your competitor.

.